Summary of Contents for Kunzle & Tasin NEW GOLIA PLUS S
Page 1
All manuals and user guides at all-guides.com SINGLE DISC MACHINE NEW GOLIA PLUS USER & MAINTENANCE MANUAL ...
Page 2
All manuals and user guides at all-guides.com NEW GOLIA PLUS User Manual_ May 2013 Edition Foreword This manual contains important information on the safe use and operation of this machine. Failure to read this manual before operating, adjusting or servicing this machine could cause injury or damage to persons or objects.
All manuals and user guides at all-guides.com NEW GOLIA PLUS User Manual_ May 2013 Edition Contents Key for machine symbols Operator safety instructions Storage Introduction Machine data plate Transporting and handling the machine Transport with one person Transport with two people Commencing operation Correct use Instructions for assembly following transportation...
All manuals and user guides at all-guides.com NEW GOLIA PLUS User Manual_ May 2013 Edition Key for machine symbols READ THE INSTRUCTIONS CONTAINED IN THIS USER AND MAINTENANCE MANUAL BEFORE USING THE MACHINE HEARING PROTECTION DURING USE IS RECOMMENDED PROTECTION OF THE AIRWAYS DURING USE IS RECOMMENDED HAZARD DUE TO ELECTRICITY HAZARD DUE TO MOVING PARTS...
All manuals and user guides at all-guides.com NEW GOLIA PLUS User Manual_ May 2013 Edition Storage It is advisable to store the machine in its original packaging. If the machine is removed from the original packaging and is not used for some time ensure the wheels and disc are not in contact with the ground.
All manuals and user guides at all-guides.com NEW GOLIA PLUS User Manual_ May 2013 Edition Transporting and handling the machine WARNING Due to the weight of the machine the handle and any accessories should be removed before it is transported. Request assistance to lift the machine. Transport with one person The machine can be dismantled into two parts to facilitate transportation: Handle...
All manuals and user guides at all-guides.com NEW GOLIA PLUS User Manual_ May 2013 Edition Commencing operation Correct use Keep hands and clothing away from moving mechanical parts. The work area is protected with the base frame. Instructions for assembly following transportation To assemble the machine following transportation proceed as follows: 1.
All manuals and user guides at all-guides.com NEW GOLIA PLUS User Manual_ May 2013 Edition Commencing operation Cables, extensions and plugs Only use approved cables. The maximum recommended cable length is 10m; for greater lengths use cables with a larger cross-section. ...
All manuals and user guides at all-guides.com NEW GOLIA PLUS User Manual_ May 2013 Edition Recommendations on prevention measures for users Personal safety measures WARNING Sawdust can spread through the air and be inhaled when using the sander. Always wear a dust mask when using the sanding equipment. WARNING The eyes and/or body may suffer injury if personal safety clothing is not used.
All manuals and user guides at all-guides.com NEW GOLIA PLUS User Manual_ May 2013 Edition Recommendations on prevention measures for users Compliance with safety measures and warnings The use of this machine with a damaged power supply cable may cause electric shock. HAZARD Do not use the machine if the power supply cable is damaged.
All manuals and user guides at all-guides.com NEW GOLIA PLUS User Manual_ May 2013 Edition Machine specifications MODEL Drive disc dimension: Ø 410mm Ø 410mm Ø 410mm Brush dimension: Ø 410mm Ø 410mm Ø 410mm Rotation speed: 150rpm 150rpm 250rpm Europe Europe...
All manuals and user guides at all-guides.com EW GOLIA A PLUS Us ser Manua May 2013 E Edition achine war rnings ohibited use WARNING This equipme ent is not to be used by anyone (chil ldren include ed) with phys sical or ment tal disabilities s, or anyone...
All manuals and user guides at all-guides.com NEW GOLIA PLUS User Manual_ May 2013 Edition Preparing to start the machine WARNING Only use accessory and abrasive discs recommended by the sander manufacturer, and which are suitable for the required sanding procedure. 6.
All manuals and user guides at all-guides.com NEW GOLIA PLUS User Manual_ May 2013 Edition Tilt enable microswitch There is a tilt enable microswitch on the end of the handle which enables the machine to be started only when the handle is tilted for the start-up phase (in accordance with instructions on pg.
All manuals and user guides at all-guides.com NEW GOLIA PLUS User Manual_ May 2013 Edition Machine adjustment procedures Centring the accessory disc If fitted correctly (as outlined in number 5 on page 12), once the motor is running the accessory disc is centred and locks automatically on the machine.
All manuals and user guides at all-guides.com NEW GOLIA PLUS User Manual_ May 2013 Edition Emergency situations (for the user) FAULTS CAUSES SOLUTIONS Insufficient cutting Unsuitable or worn abrasive Replace the abrasive Insufficient motor speed Insufficient tension due to: Excessive cable length or unsuitable Use cables of suitable length and cross section cross section...
All manuals and user guides at all-guides.com NEW GOLIA PLUS User Manual_ May 2013 Edition DECLARATION OF CONFORMITY DECLARATION OF CONFORMITY 95/2006 EC, 42/2006 EC 108/2004 EC, 95/2002 EC 96/2002 EC KUNZLE & TASIN S.r.l. Manufacturer and entity authorised to compile and maintain the technical file Registered headquarters Business Management and Production Site Via Circonvallazione Est.
All manuals and user guides at all-guides.com EW GOLIA A PLUS Us ser Manua May 2013 E Edition sposal maltimento d di apparecchi iature da rott tamare da pa arte di privati nell’Unione Europea. Qu uesto simbolo ppare sul prod dotto o sulla confezione in ndica che il p...
Need help?
Do you have a question about the NEW GOLIA PLUS S and is the answer not in the manual?
Questions and answers