Advertisement
Specifications
Operating voltage
Current
Normal operating
Alarm
Actual alarm point
Vibration level
Air velocity [1]
Rate-of-rise
Wall mount distance from
ceiling
Maximum spacing [2]
for Heat Detectors
Compatible bases
Standard
Relay
Isolator
Audible
Compatible detector testers [3]
Operating environment
Temperature
Relative humidity
Storage temperature
Environmental compensation
[1] For duct installation, use a KI-DMP duct detector mounting plate
and install per P/N 3102482-EN.
[2] When replacing KI-HFD and KI-HRD detectors with the KIR-
OSHCD, ensure that the spacing is 50 ft. (15.2 m) or less.
[3] Requires the SIGA2-TSTSPACER Testifire adapter assembly.
Regulatory information
UL smoke
0.5 to 4.36 %/ft. (1.63 to 13.62 %/m) obscuration
sensitivity range
UL fixed-
135°F (57.2°C)
temperature alarm
rating
UL CO alarm level
70 ppm 60 to 240 minutes [1]
150 ppm 10 to 50 minutes [1]
400 ppm 4 to 15 minutes [1]
UL CO False
30 ppm 30 days[1]
alarm level
70 ppm 60 minutes[1]
North American
UL 268-7, UL 521, UL 2075
standards
Note: This detector has been evaluated to the CO
alarm sensitivity limits of UL 2034.
FCC compliance
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
[1] Sensitivity per UL 2034
Contact information
For contact information, see www.kidde-esfire.com.
4 / 4
15.20 to 19.95 VDC
43 uA
70 uA
129 to 141°F (53.9 to 60.6°C)
10 to 35 Hz, with an amplitude of
0.01 in.
0 to 4,000 ft./min (0 to 20.32 m/s)
15°F/min (8°C/min)
12 in. (305 mm) max.
50 ft. (15.2 m) centers
KI-SB, KI-SB4
KI-RB, KI-RB4
KI-IB, KI-IB4
KI-ABDT, KI-ABLT
Testifire 2000
32 to 100°F (0 to 38°C)
0 to 90% noncondensing
−4 to 140°F (−20 to 60°C)
Automatic
firealarmresources.com
P/N 3102678-EN • REV 001 • ISS 02DEC20
Advertisement
