Advertisement
2 piece 185mm circular saw blade set
INSTRUCTION MANUAL & SAFETY GUIDE
Always wear suitable safety wear
WARNING:
Units 1 & 2 Northpoint Business Centre, Horton Road, West Drayton, Middlesex, UB7 8EQ
Stock Code: V5000
IMPORTANT WARNING:
Using tools can be dangerous.
Always take care and keep away
from children. Wear protective
eyewear in work area at all times.
Always wear work gloves. Select
the correct type and size of tool
for work / application.
DK Tools Ltd
www.amtechdiy.com
ENVIRONMENTAL PRO TECTION
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or
retailer for recycling advice.
Advertisement
Table of Contents
Summary of Contents for Amtech V5000
- Page 1 2 piece 185mm circular saw blade set Stock Code: V5000 INSTRUCTION MANUAL & SAFETY GUIDE IMPORTANT WARNING: Always wear suitable safety wear ENVIRONMENTAL PRO TECTION WARNING: Using tools can be dangerous. Waste electrical products should not Always take care and keep away from children.
- Page 2 DK Tools Ltd policy of continuous improvement determines the right to make modifications without prior warning. 2 piece 185mm circular saw blade set (24T/40T) (For use with Amtech V6145) Stock Code: V5000 CONTENTS:...
- Page 3 Personal Safety For your personal safety always ensure that you: Review and follow the instructions carefully, particularly when changing blades. Wear suitable ear defenders before handling the saw. Wear suitable eye protection before handling the saw. Wear protective gloves before handling the saw. Wear suitable protection against dust before handling the saw.
- Page 4 2) Fastening/replacing of tools and parts Unplug your circular saw or remove the battery before fitting or replacing the blade. The machine manufacturer’s instructions must be followed when mounting the blade. Ensure that the blade and the tool body are clamped securely so that they do not loosen during operation.
Need help?
Do you have a question about the V5000 and is the answer not in the manual?
Questions and answers