Product Structure Front cam Rear cam 1. Key button 3. MIC 5. Reset 2. TF card slot 4. USB charging port Key button 1. Long press 3 seconds to turn on / off the power. 2. Short press once to start / stop recording. 3.
Page 4
Operations Charge the Battery 1. Please charge the camera before use. 2. Please use the USB cable in the box to charge the camera. 3. While charging, the charging light (red light) will remain on, and it will automatically shut off at full charge. PS.During use, there is a battery low-power alarm (quick flash of green light).
Page 5
Using the Camera 1. Before use, make sure that the camera is fully charged and the TF card is inserted. The TF card must be formatted when using it for the first time. 2. Long press the key button 3 seconds to turn on the camera, and it will vibrate once.
Page 6
Intelligent Energy-saving System 1. In normal recording mode, when the camera stays static for 3 minutes, it will automatically off to save power. 2. When the external power supply is connected, the energy-saving system will not work. 3. The function can be turned on/off in the APP setting page. Set up Please check the video of how to set up the camera.
Page 7
2. The camera and the controller will be automatically connected within 3 meters. Lock file button Take photo button Use the APP via WIFI Please scan the QR code to download the APP, or search LOOKING CAM on Google play/APP store. iOS Looking CAM Android Looking CAM...
1. Download the LOOKING CAM APP. 2. When the camera is turned on, short press the key button twice to turn on the WIFI. When the WIFI is on, the blue WIFI indicator light will flash, but if it is not connected to the phone within 1 minute, WIFI will automatically turn off.
Page 9
Condensation Notice 1. Due to the good sealing of LOOKING camera, there is no leakage for air to flow in or out. It is normal that the condensation forms on the lens case when drastic changes in temperature or humidity occurs.