Subscribe to Our Youtube Channel
Summary of Contents for DATONG NP33 Series
- Page 1 Shenzhen Datong Youlian Technology Co., Ltd. NP33x Operation Guide Operation Manual / Configuration Tool Instructions / Driver Installation xuelin shen 2021-06-03...
-
Page 2: Table Of Contents
目录 NP330/NP332 User Manual............................3 Important Notice..............................3 Disclaimer ................................3 Copyright Notice..............................3 Technical Support ..............................3 1 Introduction................................... 3 1.1 Purpose of writing............................. 3 1.2 Explanation of terms ............................3 2 Product Description..............................4 2.1 Product function description .................... -
Page 3: Np330/Np332 User Manual
Thank you for purchasing the "Network Print Server" product (hereinafter referred to as the print server) produced by Shenzhen Datong Youlian Technology Co., Ltd. Before installing and using the product for the first time, please read this statement carefully so that you can better understand and use this product. -
Page 4: Product Description
AP : Refers to the wireless WIFI network hotspot. The print server with WIFI function can connect to the AP wirelessly . 2 Product Description 2.1 Product function description The print server mainly provides network printing support for USB printers. Computers and mobile phones in the intranet can be connected to the print server through the network (network cable, WIFI ) to print. -
Page 5: Indicator Light Description
2.4 Indicator light description 2.4.1 Interface description 2.4.2 Indicator light and reset button 3 Configure the print server 3.1 USB connection The USB cable provided by the print server can be used as power supply for the product, and it can also communicate with the computer. -
Page 6: Network Cable Connection
3.2 Network cable connection When the factory network port default DHCP state, when the network cable, automatically from the router ( DHCP assigned a dynamic server) IP address, the user may router or DHCP terminal list server, a query to the current print server IP address, when the print server is normally connected to the network, the user can connect through the network through a browser or a configuration tool ( WINDOWS version). -
Page 7: Connect Using Usb
3.3.1 Connect using USB When the user uses the USB connection, the software will wait for the print server to connect to the computer. When the USB is recognized by the computer, the word USB will be displayed in the lower left corner of the software . -
Page 8: Notice
In this window, select the IP address of the print server that needs to be set to connect. The IP in the figure is subject to the actual situation. ※Notice※ The print server is a product with an operating system, and it takes about 20 seconds to start up from power-on to ready . -
Page 9: System Parameters
3.3.4 System parameters: Device name: When there are multiple print servers in the network, it is recommended to modify the device name, which can be quickly found when the mobile phone searches for the print server. Print transfer mode settings: The system defaults to output directly to the printer. -
Page 10: Network Configuration
3.3.5 Network Configuration Network port configuration: Users can configure the cable interface network parameters, such as IP , etc., if the manually assigned IP address, assigned in a network does not use IP addresses. Do not enter if using DHCP . It is recommended to use manual allocation for configuration. When the network cable is connected for the first time, an IP is automatically allocated , and this IP can also be used as a fixed IP address. -
Page 11: Firmware Update
3.3.6 Firmware update Users can use this function to update the firmware of the print server. Click "..." to open the firmware file that needs to be updated, click "Update" to complete the operation, after the update is completed, you need to restart the print server to take effect. 3.3.7 Restart The user can restart the print server through the software. -
Page 12: Install The Computer Printer Driver
※At this time, the configuration of the print server is basically completed. If it is connected by USB , unplug the USB cable from the computer , connect it to the USB power supply provided by us, and connect the USB cable of the printer . If it is a network connection, please connect the Internet line. 4 Install the computer printer driver Preparations before installing the printer driver on the WINDOWS computer : 1. - Page 13 as shown below At this point, the computer will look for the printer operation, wait for a while, click "The printer I want is not in the list" After clicking, enter the printer installation interface, select "Add a local printer or network printer by manual setting", and then click "Next"...
- Page 14 After clicking "Next", the IP address addition window will appear, as shown in the following figure: In this window, enter the IP address of the print server, the port name (optional), and uncheck "Query the printer and from ..." , Click "Next"...
- Page 15 In the printer driver model window, select the corresponding printer driver. If the printer model is not found in the default list, please click "Install from Disk" to find the previously prepared printer driver file directory. The extension of the driver is generally xxxx .inf ends. This example printer HP1020 is already in the list, so just select it.
-
Page 16: Install The Printer Using The Dedicated Printer Installer
Here, keep clicking Next until the installation is complete. 4.2 Install the printer using the dedicated printer installer We provide a matching printer installation wizard program, users can use this software to automatically discover the print server in the network and the connected printer model, and the program will automatically add the printer's network port and driver for the printer. - Page 17 After selecting the print server and printer, click "Next" to enter the printer driver selection. On the driver selection page, the software can obtain the printer model, and there is a printer driver on the computer, the software will automatically find the corresponding driver. When there is a driver in the corresponding printer type that cannot be found in the list, the user can specify the driver file in the disk, and the file extension is INF file.
-
Page 18: Modify Printer Properties
※If the installation fails, please use the method of installing the printer in the previous chapter to install it. ※ After the installation is completed, you need to modify the printer properties, please refer to the next chapter. (important) 4.3 Modify printer properties After the printer is installed, please check whether the following printer parameters are correct, as shown in the following figure: ※Need to cancel "Enable Bidirectional Support"... -
Page 19: Troubleshooting
HP1020 is a special printer. After installation, it defaults to IMF , so it needs to be manually changed to RAW . At present, most printers on the market support RAW . Under normal circumstances, no modification is required. It is best to confirm after installation. Print Test Page to print normally. - Page 20 5. For some printer models, such as Canon's LBP2900+ system and EPSON PHOTO xxx series, since the printer driver does not support network printing, you need to use the virtual USB port in the fifth section to connect. For details, please refer to Chapter 5.
-
Page 21: Scan Support
5 scan support Since the scanning mode is very different from printing, the supporting scanning software of many printers does not support network scanning, so it is necessary to use the virtual USB port tool VirtualHere , which is small and does not need to be installed. There is a distinction between 32 -bit and 64 -bit versions. The corresponding operating system software version is automatically opened through our configuration tool software, and users can also manually open it. -
Page 22: Set Virtualhere Software Language
In the picture, you can see the MFP connected to the print server. This article lists the Canon MF4450 as an example. It can be seen that the MF4450 has appeared in the list. 5.3.1 Set VirtualHere software language On the top-level directory of the software, right-click, select “ Advanced Settings…. ” to enter the advanced settings of the software, 5.3.2 Connecting the Scanner Select MF4450 in the software (depending on the actual situation), right-click the mouse, select... -
Page 23: Troubleshooting Virtualhere
5.4 Troubleshooting VirtualHere When opening VirtualHere , the system reports that the xxxx file is missing , as shown in the figure below, you need to download the VC++ runtime library. Users can download and install the corresponding library in Baidu query.
Need help?
Do you have a question about the NP33 Series and is the answer not in the manual?
Questions and answers
I can't install the wireless option. It is not clear in the manual. I do say that you first have to install the wireless connection, but when I connect the print server I don't see it in the wifi network devices.
To install the wireless option for the DATONG NP33 Series print server if it does not appear in the Wi-Fi network devices:
1. Connect to the print server and open its configuration interface.
2. Click the "Scan" button to search for nearby Wi-Fi hotspots.
3. Select your Wi-Fi network from the list.
4. Enter the correct Wi-Fi password.
5. Choose a fixed IP address that is not already in use on the network, or use DHCP (not recommended unless the router assigns a static IP).
6. Save the settings and restart the print server for the changes to take effect.
If the print server still does not appear, verify network settings and use the PING command to check connectivity.
This answer is automatically generated
can np330 work with Epson printer and print via a MacBook ?