Advertisement
2. If the product is placed on a tree, the tree should be well secured and stable.
3. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire
insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
4. When storing the product, carefully remove the product from wherever it is placed, to avoid any undue strain or stress
on the product conductors, connections, and wires.
5. When not in use, store neatly in a cool, dry location protected from sunlight.
CAUTION:
To reduce the risk of fire and electric shock:
1. Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal.
2. Do not mount or support wires in a manner that can cut or damage wire insulation.
CONTENTS
Illusion Projector
Image Slides
Fuse
Stake
ILLUSION PROJECTOR ASSEMBLY INSTRUCTIONS
Set-up Approximately 1-5 minutes.
1. Remove contents from packaging.
2. Open the lid of the Illusion Projector (turn
right or left), insert desired image slide.
(see Illustration 1)
3. Push A through the circle, insert the
grooves of Illusion Projector, and tighten
the circle, then adjust the angle of Illusion
Projector. (See Illustration 2) and tighten
screw B.
4. Get together the Tripod Stake for outdoor
using, and separate the Tripod Stake for
indoor using. (see Illustration 3)
5. Plug into receptacle or other outlet device to
activate your Illusion Projector.
6. When plugged in, the projected image gradually transitions from fuzzy to clear to blurred out —then repeats. This is the
normal operation of the projected image.
7. To deactivate, unplug.
USER SERVICING INSTRUCTIONS
Fuse Replacement
WARNING:
WARNING:
1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by
pulling on the cord.
2. Open fuse cover. Slide open the fuse access cover on top of the attachment plug
towards blades. (See illustration)
3. Remove fuse carefully.
4. Replace fuse only with 5 Amp Max, 125 Volt fuse (provided with product).
5. Close the fuse cover. Slide closed the fuse access cover on top of the attachment plug.
1pc
6pcs
2pcs
1pc
Risk of Fire:
Replace only with same size and type of fuse.
Risk of Fire:
Do not replace the attachment plug. Contains
a safety device (fuse) that should not be removed. Discard
product if attachment plug is damaged.
Illustration 1
E-2
A
B
Illustration 2
Ground
Illustration 3
Working
Fuse
Replace
Fuse
Advertisement
