Summary of Contents for Zeggo WLX_BTZ1
- Page 1 ZEGGO WLX_BTZ1 Future Integrated Data Evaluation Wireless Water Leakage Detector Model: WLX_BTZ1 USER MANUAL REV. 1, 03/19...
- Page 2 ZEGGO WLX_BTZ1 DOCUMENT HISTORY Release Date Revision Description First Release, Water Leakage Detector WLX_BTZ1 14/12/17 V1.0 16/04/19 System manual updated 14/10/19 Sensor Sensing Interval Info Updated. REV. 1, 03/19...
-
Page 3: Specification
ZEGGO WLX_BTZ1 Introduction Thank you for selecting the Zeggo Wireless Water Leakage Detector. This device transmits sensor reading wirelessly from remote location to designated gateway for online monitoring. In this package you will find: • One Transmitter WLX_BTZ1 • One User Manual This device is ideal for monitoring the leakage of water of designated environment at 24/7. -
Page 4: Product Description
Figure 1: WLX_BTZ1 Description Product Introduction WLX_BTZ1 Water Leakage Detector functions as a remote transmitting device. A gateway with internet access must within the range that the sensor reading can successful transmit over to the gateway. The radio range between transmitter and gateway varies significantly based on the site environment and surrounding objects (metal walls, furniture etc.). -
Page 5: Sensor Connection
ZEGGO WLX_BTZ1 During start up, the device sent out a signal every 6 second and there is a total of 6 start up transmission cycle. It is useful to check the transmission status during starting period (about 36 seconds) before device going into normal operation which has longer transmission interval. Start up operation can trigger repeatedly every turning on device from off state. - Page 6 The device will back into OFF state. It will bind to nearest gateway and follows the transmission interval setting after turned ON (after startup cycle finished). *Remark: WLX_BTZ1 model detects the change of state from its sensor input. The change of state detected is sent out at every 15 minutes interval.
- Page 7 Both the battery level and signal level of the device can be view from Zeggo’s portal. It is recommended to replace the battery if battery level is less than 20%. The suggested signal percentage for a stable connection is >40% to take care the moving object or addition of object in between signal...
- Page 8 ZEGGO WLX_BTZ1 Limited Warranty & Limitation of Liability Innoflex Pte Ltd warrants that the hardware of product will be free from material defects in workmanship and materials under normal use in accordance with Innoflex instructions and directions from the purchase date of the product, for the period (“Warranty Period”), except as otherwise stated herein.
- Page 9 ZEGGO WLX_BTZ1 Email: support@innoflex.com.sg www.zeggo.com.sg Subject to change without notice. • Copyright © 2017 • Printed in Singapore REV. 1, 03/19...
Need help?
Do you have a question about the WLX_BTZ1 and is the answer not in the manual?
Questions and answers