Summary of Contents for Lightobject LO-800W
- Page 1 LightObject – Water heater Quick-start manual LightObject | 12/2021 Address: 21 Blue Sky Court, Sacramento CA 95828 Phone: (916) 383-8166 Email: contactus@lightobject.com...
- Page 2 Product Description: The LightObject water heater is a perfect addon to a water chiller without heating function. It is design to warm up the circulating water to the programmable set temperature. Application: • Maintaining water temperature above a certain minimum, for example in freezing climates to prevent ice cracking glass Laser tubes.
- Page 3 Layout Diagram Up button Menu/back button Down button Main Screen On/off Button Water outlet Water inlet AC power input Fuse location PAGE 2...
- Page 4 Main Screen 110V 220V mode status Water Flow reading Temperature reading Flashing icon Water flow icon when heating Menu Settings PAGE 3...
- Page 5 Hooking up the water heater device Laser Machine Water heater device Water Chiller Position water heater device between water outlet of laser machine and water inlet of chiller. 2. Connect OUTLET of chiller to INLET of heater device and OUTLET of device to INLET of chiller.
- Page 6 Safety Warning: The safety precautions stated below are mandatory guidelines that must be followed. LightObject will not be held responsible for damages or injuries resulting from improper use of the Afterburner – water heater. Make sure 110/220V setting matches your AC power input.
Need help?
Do you have a question about the LO-800W and is the answer not in the manual?
Questions and answers