Advertisement
ASSEMBLY INSTRUCTIONS
1-
Screw m4x 16mm
2-
Screw m4 x 50mm
3-
Restraint Strap
4-
Mounting Bracket
NOTE: Quantities shown are for one server. Bolts are metric screw threads
A
FURNITURE TIPPING RESTRAINT
4
A
5/8"
2"
1
WALL
A
This tip restraint must be attached to a wall stud using the
2" screw enclosed.
1- Attach a bracket securely to the back top of the furniture
4
4
using the 5/8" screw provided, through the smaller hole.
2- Locate the other bracket on the wall over a wall stud
and 2 inches below the mounting bracket secured to the
back of your unit. Attach to the wall stud using 2" screw
3
provided, through the smaller hole.
3- Place the furniture into position so both mounting
brackets are vertically in line.
4- Lace the end of the restraint strap through the larger
hole in each mounting bracket. Bring both ends together
and slide the flat end through the locking end and draw it
through until all slack is removed.
5- Confirm that the strap is securely laced and locked.
ITEM # B7003-C
1 pc
1 pc
1 pc
2 pcs
4
2
PAGE 1 OF 1
Advertisement
