Advertisement
27IN 50L PENGUIN WITH LIGHT STRING
ITEM NUMBER: TY-A-50L/1W-33(27)
A. Head
B. Body-2 halves
Qty：1pc
D. Scarf
E. Plastic Ties
Qty：1pc
C. Hand/Lightstring
Qty：2pcs/1pc
F. Ground Stake
Qty：4pcs
ASSEMBLY INSTRUCTIONS
FIG.1
STEPS:
(1)Carefully remove all of the parts from the box and place on a flat surface. Check the Parts
List to make sure all of the parts are included. If there are any plastic covers to protect the end
of metal rod tips, remove the covers before assembly.
(2) Align two halves of the penguin Body(Part#B) with each other and insert the rods on one half
into the matching holes on the other half and fasten them together with the Plastic ties(Part#
E);Instert the Head(Part#A) into the holes top of the body.(See FIG.1)
(3)Insert the rods of the Hand(Part#C)into the holes of the Body and fasten them together with
the plastic ties.(See FIG.2)
(4)Wrap the scarf (Part # D) around the neck and hooking the lightstring on the hand.(See FIG.3)
(5) Secure the sculpture to the ground with the Ground Stakes(Part # F,See FIG.3).
(6) Plug in.
FIG.2
FIG.3
Advertisement
