Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Newstripe Aerovent 1
Summary of Contents for Newstripe Aerovent 1
- Page 1 AeroVent ® Product Manual AeroVent 1 Manual / 4290.0416 ®...
-
Page 3: Table Of Contents
® AeroVent Thank you and congratulations on TABLE OF CONTENTS ® your purchase of the AeroVent aerosol can depressurizer. Precautionary Warning…..Page 1 ® The AeroVent 1 has been designed Assembly…………………….. Page 2 to puncture and drain aerosol cans Operation ……………………. Page 3 that have been used and are mostly empty. -
Page 4: Precautionary Warning
AeroVent ® ALWAYS wear safety goggles or protective eye-wear when operating the unit! PRECAUTIONARY WARNING! Always consult your Facility Safety and/or Personnel Department for specified safety protocols prior to operating this equipment. Please read and understand all operation instructions as detailed in this manual. -
Page 5: Assembly
AeroVent ® ALWAYS wear safety goggles or protective eye-wear when operating the unit! Your AeroVent 1 box should include these ® parts: Operating Plunger Handle #3 Block Kit #7 5/16-18 x AeroVent unit with ground cable ® 3/4” Bolt (4) ... -
Page 6: Operation
AeroVent ® ALWAYS wear safety goggles or protective eye-wear when operating the unit! OPERATION 1) Lift the operating handle to release clamp, and open the AeroVent 1 lid. ® 2) Can stop should be in slots at front of the trough liner. 3) Insert 1 aerosol can with the bottom of the can pointing toward the clamp, and up against the forward stop. -
Page 7: Maintenance
AeroVent ® ALWAYS wear safety goggles or protective eye-wear when operating the unit! MAINTENANCE ITEM CHECK *REPLACE Lid Gasket 10004249 Before each use As Necessary Carbon Filters 100001941 (single) Monthly Every 60 days or 600 cans, more 10001860 (2 pack) often for full cans Cobalt Points 10003377 Before Each use... -
Page 8: Cobalt Point Replacement
AeroVent ® ALWAYS wear safety goggles or protective eye-wear when operating the unit! COBALT POINT REPLACEMENT (See Assembly Drawing Page 6) HELPFUL HINT: Leave the unit mounted on the drum to replace cobalt points. 1. Open the lid and remove the left and right shrouds. 2. -
Page 9: Assembly Drawing
AeroVent® 1 Assembly Drawing Operating Handle #3 Swivel Foot #4 Cobalt Point #13 Bellows Clamp #20 Trough Bellow #11 Trough Spring Right Shroud #19 Support Foot Set Screw AeroVent™ 1 Manual / 4290.0416 Page 6 of 7... -
Page 11: Warranty
18 (Eighteen) months from the date of purchase. In no event shall Newstripe, Inc. be liable for incidental or consequential damages and no person had any authority to bind it to any representation or warranty, not be responsible for work done, materials furnished or repairs made by others without its' specific written authorization.
Need help?
Do you have a question about the Aerovent 1 and is the answer not in the manual?
Questions and answers