Servicing The Charging Station; Cleaning The Touch Screen - Siemens SICHARGE UC Operating Instructions Manual

Table of Contents

Advertisement

SICHARGE UC Dispenser UL | Operating Instructions

10.5 Servicing the charging station

10.5.1 Cleaning the touch screen

The touch screen is designed for low-maintenance operation. Clean the touch screen regularly
to ensure that the touch screen is in perfect condition.
WARNING
Electric shock due to water ingress
Water entering the SICHARGE UC dispenser can damage the SICHARGE UC dispenser. If the unit is
damaged, dangerous voltages may be present on the cabinet or exposed components, which can
cause serious injury or death if touched.
• Always keep the cabinet doors closed during cleaning.
• Never use a pressure washer, steam cleaner, or water jet to clean the SICHARGE UC dispenser.
WARNING
Damage to property due to improper cleaning agents
Improper cleaning agents can damage the touch screen of the SICHARGE UC dispenser.
• Therefore, do not use any solvents.
• Also, never use aggressive or abrasive cleaning agents.
Note
Only clean the touch screen when it is switched off
If you clean the touch screen when it is switched on, you can trigger operator errors. This may
unintentionally put the SICHARGE UC dispenser into an undesirable operating state.
• Switch off the touch screen of the SICHARGE UC dispenser before you clean it.
Permitted cleaning agents and tools
• Use a mild, non-corrosive cleaning agent, even in the case of heavy soiling. An example of a
mild detergent would be dish washing liquid.
• Use only soft cleaning cloths.
Note
Observe information on chemical resistance
To ensure a long service life, observe the following information regarding the chemical
resistance of SIMATIC HMI devices.
100

Advertisement

Table of Contents
loading

Table of Contents