Summary of Contents for Betta Betta 2
- Page 1 Betta® 2 Smart Pool Skimmer Owner’s Manual www.BettaBot.com 888-692-3882 (888-MyBetta) 562-579-0001 info@BettaBot.com...
- Page 2 1. Important Safety Instructions DO NOT SWIM while Betta is working in the pool. Take it out of the pool and keep it at a cool place under the shade when the pool is in use. Betta Smart Pool Skimmer is NOT a toy. Keep it away from children.
- Page 3 You can manually control Betta’s movement and travel path in the pool using included remote control when needed. For example, if you want Betta to go left, just press and hold the left button on the remote. Remote Mode gives you fast control to move Betta wherever you...
- Page 4 To go back to Auto Mode, press the middle button down for 2 seconds, and Betta will go back to Auto. Also, if you do not operate Betta with the remote control for 2 minutes, it will go back to Auto Mode by itself.
- Page 5 Mode. Use of Anti-stranding Bars When to use: If there are shallow stairs or other structures in your pool, Betta may be stuck on it. You can adjust the built-in anti-stranding bars to solve this problem. How to use: Press the upper button on the bar housing and pull down the bars. Each bar can be set in two positions in height.
- Page 6 Wash the residues out using water hose and wipe clean with soft dry cloth. Do NOT use pressure washer to clean or any tools to scrape or brush the panel to avoid damages. Winter and Long-Term Storage If you are closing your pool for the winter, please remove Betta from the pool. Rinse Betta off...
- Page 7 Before the first use of the next season, check all the parts of Betta for signs of trouble before putting it back in use. Turn power on when ready to use.
- Page 8 7. Warranty Information Betta is designed to work in fresh water or salty water up to 5000 P.P.M. The unit comes with 1- Year Manufacturer’s Warranty from the date of purchase. Using the unit in sea water pools will void the warranty.
Need help?
Do you have a question about the Betta 2 and is the answer not in the manual?
Questions and answers
dismantle screen catch to clean hair in bearings' cant get it out without a dismantle.
To clean hair from the bearings on a Betta 2, follow these steps based on the provided context:
1. Slide the power switch off.
2. Unlock the cover lock.
3. Lift the basket handle up to remove the basket out of the unit.
4. Empty the debris from the basket.
5. Rinse the basket with a water hose until it is completely clean.
6. Check the propellers and impeller for dirt, string, or hair, and clean them to ensure they turn freely.
7. Reinstall the basket, secure the cover lock, and turn the power back on.
The context does not specifically mention dismantling the screen catch, but cleaning the basket, propellers, and impeller as described should remove hair from the bearings.
This answer is automatically generated
My betta bot giving flashing green and then red. Help?
One of the sensors is not working. The light does not blink and the unit keeps banging into the wall. Propellers and wheels are cleaned and free of debris.
What type plug does the Betta skimmer use I lost the plug part that I need to plug into the outlet for charging