Attaching Of The Puncture Adapter - Hitachi S31KP Instruction Manual

MN1-5831 Rev.5 MN1-5831 Rev.5

4-2. Attaching of the puncture adapter

(1) Align the front mark and the protrusion on the probe with the puncture adapter guide hole and the puncture guide
groove, then attach the puncture adapter to the probe.
Front mark
Protrusion
(2) Check that the front mark and the protrusion on the probe fit the guide hole and guide groove on the adapter
respectively. Then, tighten the fixing knob.
Fit
Figure 9 Attachment and fixture of puncture adapter 1
Tighen the knob
Fixing
knob
Figure 10 Attachment and fixture of puncture adapter 2
Fit
-14-
Guide hole
Guide groove