Advertisement
Available languages
Available languages
The #34040 Gen 2 ION Power Adapter is equipped with two USB
5 VDC ports, and one 12 VDC barrel port. It is designed to charge
and supply power to USB compatible devices and standard barrel
plug adapters with the use of ION 40V Gen 2 Lithium-ion batteries.
IMPORTANT SAFETY INSTRUCTIONS
FOR ION POWER ADAPTER
WARNING
SHOCK HAZARD. DO NOT ALLOW ANY LIQUID TO GET INSIDE
THE ION POWER ADAPTER. ELECTRIC SHOCK MAY RESULT.
WARNING
BURN HAZARD. TO REDUCE THE RISK OF INJURY, USE ONLY
COMPATIBLE ION 40V GEN 2 LITHIUM-ION BATTERIES WITH
THE ION POWER ADAPTER.
•
Before using the ION Power Adapter, read all instructions and
cautionary markings on the Power Adapter and battery.
•
This ION Power Adapter is not intended for any uses other than
supplying power/charging through USB and 12V barrel ports. Any
other uses may result in risk of fire, electric shock, or electrocution.
•
Do not expose the ION Power Adapter directly to rain or snow.
•
When operating the ION Power Adapter outdoors, make sure it is
in a dry location.
•
Do not disassemble the ION Power Adapter, this product is not
serviceable.
•
Never modify the ION Power Adapter or any part of it. Damage
or personal injury could result.
OPERATION
NOTE: For best results, make sure your battery is fully charged.
NOTE: Always ensure that your Gen 2 Power Adapter is
operating on a Gen 2 battery.
TO INSTALL ION POWER ADAPTER
Slide the ION Power Adapter onto the battery until it is firmly seated.
Once seated, turn the Power Adapter on by sliding the on/off switch to
the "ON" position. SEE FIGURE 1.
WARNING
FIRE HAZARD. DO NOT STORE OR CARRY THE BATTERY PACK
SO THAT METAL OBJECTS CAN CONTACT EXPOSED BATTERY
TERMINALS.
TO REMOVE ION POWER ADAPTER
Ensure that the ION Power Adapter switch is turned off. Hold battery firmly
and pull the ION Power Adapter until it disengages from the battery.
SEE FIGURE 2.
OUTPUT PORTS
The ION Power Adapter is equipped with two USB 5 VDC 2.1 amp ports, and
one barrel 2.1mm x 5.5mm 12 VDC 1.5 amp port.
ioniceaugers.com
POWER ADAPTER WARRANTY: 1-YEAR LIMITED WARRANTY*
Ardisam, Inc., warrants this ION Power Adapter under a one-year limited warranty to
be free from defects in materials or workmanship or both for a period not exceeding
twelve consecutive months from the date of original purchase by the first retail
consumer or commercial end user. "Consumer use" means personal recreational use by
a retail consumer. "Commercial use" or "commercial application" means all other uses,
including use for commercial, income producing or rental purposes. Once a product
has experienced commercial use, it shall thereafter be considered as a commercial
product for purposes of this warranty. This warranty applies to the original owner that
provides a proof of purchase. The warranty is not transferable. The warranty period
begins on the date of purchase by the first retail consumer or commercial end user,
and continues for the twelve month consecutive period thereafter. Any unit used in
a commercial application is covered for a period of 90 days after purchase. For the
warranty to be valid, the product must be registered online at www.IonIceAugers.
com, or the warranty card must be filled out and received by Ardisam, Inc., within 30
days of purchase. Ardisam, Inc. shall not be obligated to ship any repair or replacement
product to any location outside of the United States of America or Canada.
*This warranty applies only to products which have not been subjected to negligent
use, misuse, uses other than those indicated in the product's owner's manual, alteration,
accident, use of unauthorized parts, failure to perform periodic maintenance as specified
in product's owner's manual, normal wear and tear, use of unauthorized parts or repairs
performed at non-authorized service centers. There is no other expressed warranty.
Implied warranties, including those of merchantability and fitness for a particular
purpose, are limited to one year from purchase, or to the extent permitted by law. All
other implied warranties are excluded. Liability for incidental or consequential damages
are excluded to the extent exclusion is permitted by law. Ardisam, Inc. does not assume,
and does not authorize any other person to assume for us, any liability in connection
with the sale of our products. To obtain warranty service, you must have prior
approval by calling our customer service department at 1-800-345-6007. If you
choose to ship your product to Ardisam for warranty repair, you must first have prior
approval from Ardisam by calling our customer service department for a return material
authorization number (RMA#). Under these circumstances, all items must be shipped
prepaid. Ardisam will at no charge, repair or replace, at their discretion, any defective
part which satisfies all conditions stated above. Ardisam retains the right to change
models, specifications and price without notice. Ardisam, Inc. shall not be obligated to
ship any repair or replacement product to any location outside of the United States of
America or Canada.
FIGURE 1
FIGURE 2
34185 // ECN # 12322 // REV1 05/22/19 // © 2019 Ardisam, Inc. // All Rights Reserved.
Operator's Manual
ION
Gen 2 Power Adapter
™
OFF
ON
Advertisement
