Advertisement
Step 3 - Attach split sleeves
(for 3-sided frame) to posts.
Snap split sleeve onto each post at
the groove covering #39 (top of
front posts).
split
sleeves
39
Step 5 - Attach split sleeves
(for rear truss) to posts.
Snap split sleeve onto each rear
post at the groove covering #46.
split
sleeves
46
Step 7 - Install display shelf.
Hook display shelf over rear truss with
short flange down, allowing front of shelf
to rest on 3-sided frame.
(Note: If shelf does not fit correctly,
lower rear truss.)
display shelf
rear truss
3-sided frame
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2005 by the Eagle Group
Panco
Display Rack
®
ASSEMBLY INSTRUCTIONS
3-sided
channel
bottom
shelf
rear truss
Step 8 - Attach sign to rear posts
(using velcro supplied).
Load pans onto bottom shelf, load one
pan onto display shelf, and attach
peel-off label to pan on display shelf.
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065 or 302/653-3036
Step 4 - Assemble 3-sided frame to posts.
Note: Long side goes to the front of the unit
(short posts).
corner
collar
split
sleeve
Step 6 - Assemble rear truss to posts.
truss
collar
split
sleeve
sign
Advertisement
