Eagle Group Panco Assembly Instructions

PART #A206226
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY
. SAVE YOUR BOX AND ALL PACKING MATERIALS.
DAMAGE
FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
#3
#2
#1
Step 1 - Attach split sleeves
(for bottom shelf) to posts.
Snap split sleeve onto each post at
the bottom groove covering #3 (the
wider part of the taper goes toward
the bottom).
split
sleeves
3
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2005 by the Eagle Group
Panco Display Rack
®
ASSEMBLY INSTRUCTIONS
CAUTION
Parts List
#4
#5
#8
#6
#7
Step 2 - Assemble bottom shelf to posts.
Note: Make sure the velcro on rear posts are facing towards the front.
rear posts
(longer with
velcro)
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065 or 302/653-3036
YOU ARE RESPONSIBLE
# qty
#1 1
#2
1
#3 1
#4
1
#5 1
#6
2
#7 2
#8
3
qty
1
front
posts
(shorter)
description
18˝ x 30˝ wire shelf
three sided truss frame
single truss frame 30˝
Panco ® display sign
top display shelf
40˝ post
63˝ post with velcro
bags of 4 split sleeves
(not shown)
description
peel-off label for display pan
shelf
collar
post
split
sleeve
EG10039 Revised 03/05