Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SriHome NVS007
Summary of Contents for SriHome NVS007
- Page 1 4G LTE NVR Kit Quick Operation Guide V1.0 EN202202 NVS001B/NVS007...
- Page 2 Thank you for purchasing our products, if you have any questions or needs, please contact us, Or go to the official website www.sricam.com to view technical support. 1. Install wireless NVR Note: A. Disconnect the power from the NVR before installing a hard disk drive (HDD). B.
- Page 3 1-2. Connection NVR Connect the mouse to the USB port of the NVR. Connect to the monitor via an HDMI / VGA cable. Connect to the DC 12V adapter and turn on the power. The camera is powered via a DC adapter and the camera is wirelessly connected to the NVR Mobile App cans the QR code on the host to add equipment (page 9) Connection as below: No need to access fiber and router...
- Page 4 NVS007 1-1. NVS007 install 4G SIM card and hard disk Install the hard disk with a cross screwdriver. (1) Loosening the srews on the panel's rear and side. (2) Remove the cover from the NVR. Insert 4G SIM card (3) Insert the 4G SIM card (4G Nano small card) with the metal sheet down.
- Page 5 Mobile App scans the QR code on the host to add equipment (page 9) Connection as below: No need to access fiber and router Internet Network cable Switch connection NVS007 Built-in 4G SIM 4G Nano card slot small card 12V Adapter Tablet...
- Page 6 2. NVR Login Follow the NVR startup wizard to complete the login settings. (NVR default password: 888888) admin Login Auto Login 3. Add the Camera Right Click the Screen-Camera--Search -- Add -- OK Camera Camera Online Equipment Online Equipment IP Address IP Address Protocol Protocol...
- Page 7 Note: If the "Connection Status" prompts that the username or password is wrong, please click "Edit" to enter the correct password for the camera (Example: SriHome camera default password 888888) > OK Camera Online Equipment Remote Access Config IP 地址...
- Page 8 1. If the user forgets his password, he can operate as follows ① Right click on the blank space, close the system>log out. ② Tick automatic login> click Restart in the lower right corner. ③ Tell the customer service the date in the lower right corner to reset the password ④...
- Page 9 2. When you scan the code with your mobile phone to connect to the NVR, it prompts that the permission is not enough. Do the following: Control Panel > Restore Default > Check APP User > OK Then use your mobile phone to scan the QR code on the label on the NVR to connect. Control Panel My Device PlayBack...
- Page 10 5. SriHome App Setup Step 1. SriHome App Installation Method 1: Scan the QR code to download “SriHome” App. Method 2: Search“SriHome”on Google Play or iOS App Store. Android Step 2. Register & Login SriHome App Step 3. Add the Device to App...
- Page 11 3-1. Download SriHome App->Login Account->Add Camera ID (Prompt no permission, please contact the administrator for authorization) 3-2. Access the “SriHome” App, tap Settings -> Visitor Management -> Add. There are 2 types of permissions: Operator: Live video view, set time, alarm, record and network.
-
Page 12: Customer Service
Customer Service Skype ID: tech.sricam Website: www.sricam.com E-Mail: support@sricam.com Shenzhen Sricctv Technology Co.,Ltd Add: The building 40, 5th Industrial Park of Huaide Cuigang,Fuyong Street, Bao’an, Shenzhen, China Copyright: SriHomeNVR-V1.0...
Need help?
Do you have a question about the NVS007 and is the answer not in the manual?
Questions and answers