Advertisement
Quick Links
WPPR1-PChal-Classic
Indigo Lime.
Your parts
1
1. Outer Ring
2. Inner Ring
3. Mounting Kit
a.
Screw: M4x20 x4
b.
Nut: M4 Square x4
c.
Hex Key x1
1. Insert Nuts into Inner and Outer Rings. Use Hex Key to push all the way in
2. Very loosely, screw in all the screws. This is to check alignment and hold
Nuts in place
Visit indigolime.uk for more great products
It would be awesome if you could leave feedback. If you are not happy, please contact us before leaving negative feedback
We love to see your installations, send pic(s) to sales@indigolime.uk or Facebook: @indigolime
Wheel Plate Pivot Reinforcement
installation guide.
2
3
3. Separate Wheel Plate Hinge on Playseat Challenge
Push
4. Slide on the Rings as shown
Top Down View
for Playseat Challenge
Installation
Video
(YouTube)
Note: Having the screw
heads up at this point is
important for correct
installation
Installation guide made of 100% recycled paper
IPO Registered Design
IG 20.10.2021 – WPPR1-PChal-Classic R1
Advertisement
Summary of Contents for Indigo Lime WPPR1-PChal-Classic
- Page 1 IPO Registered Design It would be awesome if you could leave feedback. If you are not happy, please contact us before leaving negative feedback We love to see your installations, send pic(s) to sales@indigolime.uk or Facebook: @indigolime IG 20.10.2021 – WPPR1-PChal-Classic R1...
- Page 2 5. Push the Inner Ring past the locking nub on the Challenge and re-attach the tubes. IMPORTANT: Note orientation of screw holes on Inner Ring Make sure to push the Top Down View tubes together so the Top Down View locking nub engages properly.