Summary of Contents for APP Solar controller APP and PC monitoring
- Page 1 Solar controller APP and PC monitoring instruction manual Ethernet monitoring mode File No: Version: V1.0 Description: This app is currently only available for device clients such as Android phones.
-
Page 2: Table Of Contents
2. Software installation and hardware connection..............3 2.1 Software installation......................3 2.2 Hardware connection......................3 2.3 Device and Ethernet module connection...............3 3. APP account login........................4 4. GPRS mode connected device....................4 5.Viewing device..........................5 5.1 Viewing the running status of the device............... 5 5.2 Viewing Device Alarm Information.................. -
Page 3: Description
Android system phone for installation (or the installation package provided by the relevant personnel of our company) Figure 2-1 APP installation interface Note: At present, the APP is only installed and used on electronic devices such as mobile phones of the Android operating system; 2.2 Hardware connection... -
Page 4: App Account Login
The green light of the power indicator of the Ethernet module lights up. After opening the mobile phone APP, in the main interface of the device, click "My" in the lower right corner to enter the account login interface. The account number and password are both provided by the company. -
Page 5: Viewing Device
are a large number of managed devices, choose to look only at the online devices or directly enter the device number to search (refer to Figure 4-3). For detailed viewing and setting methods, please refer to below"Viewing Devices" . Figure 4-2 Solar controller in GPRS mode as an example 5.Viewing device When the device status in the device list is online, click to view the device details after entering. -
Page 6: Viewing Device Alarm Information
5.2 Viewing Device Alarm Information Click the “Alarm Information” tab to view the real-time alarm information of the device. When the green circle after the alarm message turns red, it indicates an alarm. In the parameter area below, the data is refreshed by the pull-down operation. Figure 5-2 Device Details - Alarm Information 5.3 View battery parameters Click the “Battery Parameters”... -
Page 7: Parameter Setting
Figure 5-5 Parameter setting - overvoltage voltage setting 6. Chinese and English switching Click the setting icon in the upper right corner of the APP homepage to enter the “System Settings” interface. Click “Language” in this interface to enter the language switching interface, select English or Simplified Chinese, and switch the interface to English or Chinese. -
Page 8: Pc Monitoring Device
Figure 6-1 Chinese and English display switching 7. PC monitoring device 7.1 Photovoltaic background management system login Open the browser, enter the URL: http: 47.96.6.131: 8089 to enter the photovoltaic background management system, enter the account number and password (the account number and password are provided by the manufacturer), and click login to enter the monitoring interface;... - Page 9 Figure 7-2 Device list interface Click "device monitoring" on the right side of the information bar to enter the "real-time parameters" interface. In this interface, we can view the operating parameters and customer settings parameters. Only online devices can refer to their real-time parameters.
-
Page 10: Parameter Settings
Figure 7-4 Customer setting parameters 7.3 Parameter settings Click the setting parameter on the right side of the device list information bar. In the pop-up setting parameter interface, set the specific parameters by parameter type and setting parameters. After setting, click the setting in the lower right corner to save it. After finishing, click Back to exit the setting parameter interface ;...
Need help?
Do you have a question about the Solar controller APP and PC monitoring and is the answer not in the manual?
Questions and answers