Euro-Pro HV110 Quick Start Manual

Item # XC110C
For Model HV110
Dust Cup Filters
CHANGING & CLEANING THE DUST CUP FILTER
To achieve the best performance, empty the dust cup and
clean the dust cup filter after each use.
1. To open the dust cup compartment, press down on the dust cup release
button and pull out the dust cup compartment.
2. Pull out the dust cup filter.
3. Empty the dust from the dust cup compartment.
4. Rinse the dust cup filter in cold water, and then wait 24 hours until it air dries
completely before replacing it into the dust cup compartment.
5. Replace the dust cup filter carefully into the dust cup compartment.
operate vacuum cleaner without dust cup filter in place.
6. Attach the dust cup compartment to the hand held vacuum.
CAUTION
: The suction hole must be open, free of any obstructions at all times.
Otherwise, the motor will overheat and could become damaged.

WARNING:

Always empty the dust cup and clean the dust cup filter before each use
and during prolonged usage. Never over fill the dust cup - remove dirt
and clean the dust cup filter during prolonged usage or risk motor
damage. Make sure that the dust cup filter is completely dry before
inserting back in the vacuum.

Please Note

: The Dust Cup Filter is washable. It should however be replaced
every three months to ensure peak performance of your vacuum.
USA: EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel: 1 (800) 798-7398
www.euro-pro.com
Printed in China
NEVER
Canada: EURO-PRO Operating LLC
4400 Bois Franc
St. Laurent, QC H4S 1A7
Rev. 05/04
Item # XC110C
For Model HV110
Dust Cup Filters
CHANGING & CLEANING THE DUST CUP FILTER
To achieve the best performance, empty the dust cup and
clean the dust cup filter after each use.
1. To open the dust cup compartment, press down on the dust cup release
button and pull out the dust cup compartment.
2. Pull out the dust cup filter.
3. Empty the dust from the dust cup compartment.
4. Rinse the dust cup filter in cold water, and then wait 24 hours until it air dries
completely before replacing it into the dust cup compartment.
5. Replace the dust cup filter carefully into the dust cup compartment.
operate vacuum cleaner without dust cup filter in place.
6. Attach the dust cup compartment to the hand held vacuum.
CAUTION
: The suction hole must be open, free of any obstructions at all times.
Otherwise, the motor will overheat and could become damaged.
WARNING:
Always empty the dust cup and clean the dust cup filter before each use
and during prolonged usage. Never over fill the dust cup - remove dirt
and clean the dust cup filter during prolonged usage or risk motor
damage. Make sure that the dust cup filter is completely dry before
inserting back in the vacuum.
Please Note
: The Dust Cup Filter is washable. It should however be replaced
every three months to ensure peak performance of your vacuum.
USA: EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel: 1 (800) 798-7398
www.euro-pro.com
Printed in China
NEVER
Canada: EURO-PRO Operating LLC
4400 Bois Franc
St. Laurent, QC H4S 1A7
Rev. 05/04