EXFO FTB 1v2 Quick Reference Manual

Inserting FTBx Modules

C
AUTION
To avoid damaging your unit, use it only with modules approved by
EXFO (refer to the unit's technical specifications).
1 Position the module vertically so that its connector pins are facing downwards and positioned to the left.
The identification sticker should not be visible.
2
Insert the protruding edges of the module into the grooves and push all the way to the bottom of the slot.
Note: There is no need to turn off your unit
before inserting a module.
3 Turn the two retaining screws clockwise to secure the module in place.
Its faceplate should be flush with the front panel of the unit.
FTBx Module

Removing Modules

1
From Mini Toolbox X, click the button.
C
AUTION
Once you have pressed the button, wait until the status of the
module switches to "Safe to Remove" in Mini Toolbox X.
2
Turn the two retaining screws counterclockwise until they are loose (do not remove them completely).
FTBx Module
3
Hold the module by its sides or by the retaining screws (NOT by the connectors) and pull it out.
Retaining screws
(can be used as handles to safely pull the module out)
© 2018 EXFO Inc. All rights reserved.
Printed in Canada (2018-05)
P/N: 1073259 Version: 1.0.0.1

Quick Reference Guide
FTB-1v2 and FTB-1v2 Pro

Accessing Connectors and Ports

MicroSD card slot
(for cards compatible with the SDXC format)
Headset/microphone port
(for 3.5 mm connectors)
Ethernet (RJ-45) port
USB 3.0 host port
USB 2.0 host ports
For more information,
refer to the user guide.
Single and Dual Carriers
FTBx module
Built-in power meter and VFL
(optional)
AC/DC power adapter
connector
Security slot for Kensington
lock
Note: The location of the security
slot varies with the model of
your unit.