Coltech EMD201 Quick Start Manual

Coltech EMD201 Quick Start Manual

Plug-in led dimmer switch ]

Advertisement

Plug-in LED Dimmer Switch
Art.no 36-8312
Model EMD201
Please read the entire instruction manual before using the product and then save
it for future reference. We reserve the right for any errors in text or images and any
necessary changes made to technical data. If you have any questions concerning
technical problems please contact our Customer Services.

Safety

The dimmer switch is intended for indoor use only.
Do not expose the dimmer switch to splashing or rain.
Only connect electrical devices rated for the voltage specified below.
Never use the dimmer switch with appliances that are not constructed for
use with a dimmer.
Make sure that the electrical socket that the product is plugged into is
easily accessible in case it and the connected product need to be quickly
disconnected from the mains electricity.
Do not connect products of this type to each other.
Do not cover the product.

Operating instructions

1.
Switch off the lamp that is to be connected to the dimmer switch.
2.
Connect the dimmer switch to a wall socket.
3.
Connect the lamp to the dimmer switch.
4.
Switch on the connected lamp.
5.
Adjust the brightness of the lamp using the dimmer control knob. Bear in
mind that LED bulbs are usually not dimmable down to 0 % brightness level
without a degree of flicker. This dimmer switch is designed to dim LED bulbs
in the range of 10–100 % brightness.

Responsible disposal

This symbol indicates that this product should not be disposed
of with general household waste. This applies throughout
the entire EU. In order to prevent any harm to the environment
or health hazards caused by incorrect waste disposal,
the product must be handed in for recycling so that the material
can be disposed of in a responsible manner. When recycling
your product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is
disposed of in an environmentally sound manner.

Specifications

Voltage
220–240 V AC
Frequency
50 Hz
Min/Max power
LED: 3–24 W
Incandescent bulb: 30 - 200 W
Halogen bulb: 30 - 200 W
No load consumption
< 1 mW
IP rating
IP20
Weight
105 g
UNITED KINGDOM • CUSTOMER SERVICE internet www.clasohlson.co.uk
SVERIGE • KUNDTJÄNST tel. 0247/445 00 fax 0247/445 09 e-post kundservice@clasohlson.se internet www.clasohlson.se brev Clas Ohlson AB, 793 85 INSJÖN
Vriddimmer för LED
Art.nr 36-8312
Modell EMD201
Läs igenom hela bruksanvisningen före användning och spara den sedan
för framtida bruk. Vi reserverar oss för ev. text- och bildfel samt ändringar av
tekniska data. Vid tekniska problem eller andra frågor, kontakta vår kundtjänst.
Säkerhet
Dimmern är endast avsedd för inomhusbruk.
Utsätt inte dimmern för stänk eller fukt.
Anslut endast elektriska apparater avsedda för samma spänning enligt
specifikationen nedan.
Använd aldrig dimmerfunktionen med apparater som inte är konstruerade
för detta.
Se till att vägguttaget där produkten placeras är lättåtkomligt så att den och
ansluten produkt vid behov snabbt kan frånkopplas från elnätet.
Anslut inte produkter av denna typ med varandra.
Täck inte över produkten.
Användning
1.
Stäng av den lampa som ska anslutas till dimmern.
2.
Anslut dimmern till ett vägguttag.
3.
Anslut lampan till dimmern.
4.
Slå på den anslutna lampan.
5.
Justera ljusstyrkan med dimmerreglaget. Tänk på att LED-lampor oftast inte
kan dimras stabilt ner till 0 % ljusstyrka. Denna dimmer är konstruerad för att
dimra LED-lampor mellan ca 10–100 % ljusstyrka.
Avfallshantering
Denna symbol innebär att produkten inte får kastas tillsammans
med annat hushållsavfall. Detta gäller inom hela EU. För att
förebygga eventuell skada på miljö och hälsa, orsakad av
felaktig avfallshantering, ska produkten lämnas till återvinning
så att materialet kan tas omhand på ett ansvarsfullt sätt.
När du lämnar produkten till återvinning, använd dig av de
returhanteringssystem som finns där du befinner dig eller
kontakta inköpsstället. De kan se till att produkten tas om hand
på ett för miljön tillfredställande sätt.
Specifikationer
Spänning
220–240 V AC
Frekvens
50 Hz
Min-/maxeffekt
LED 3–24 W
Glödljus 30 - 200 W
Halogen 30 - 200 W
Effektförbrukning utan last
< 1 mW
Kapsling
IP20
Vikt
105 g

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EMD201 and is the answer not in the manual?

Questions and answers

Summary of Contents for Coltech EMD201

  • Page 1 Plug-in LED Dimmer Switch Vriddimmer för LED Art.no 36-8312 Model EMD201 Art.nr 36-8312 Modell EMD201 Please read the entire instruction manual before using the product and then save Läs igenom hela bruksanvisningen före användning och spara den sedan it for future reference. We reserve the right for any errors in text or images and any för framtida bruk.
  • Page 2 LED-kiertohimmennin Dimmer for LED Tuotenro 36-8312 Malli EMD201 Art.nr. 36-8312 Modell EMD201 Lue käyttöohje ennen tuotteen käyttöönottoa ja säilytä se tulevaa tarvetta varten. Les brukerveiledningen grundig før produktet tas i bruk, og ta vare på den Pidätämme oikeuden teknisten tietojen muutoksiin. Emme vastaa mahdollisista for framtidig bruk.

This manual is also suitable for:

36-8312

Table of Contents