Atag WU90254TMM Instructions For Use Manual page 20

Table of Contents

Advertisement

Wi-Fi connectivity
Switching off Wi-Fi:
The hood and lights must be switched off.
Press the Wi-Fi button for 3 seconds. The Wi-Fi indicator is on.
Press the Wi-Fi button to turn off Wi-Fi. The Wi-Fi indicator will turn off. After 3 seconds it will
return to the Wi-Fi menu.
Press the '-' (minus) button for 3 seconds to exit the Wi-Fi menu.
Displaying the Wi-Fi status:
Wi-Fi module disabled: Wi-Fi indicator is off.
Configuration in progress: Wi-Fi indicator flashes.
Connected to home network router: Wi-Fi indicator flashes.
Connected to home network router and cloud: Wi-Fi indicator continuously lit.
Wi-Fi troubleshooting
Symptom
Wi-Fi icon not shown.
Wi-Fi setup failed.
Home network is not
displayed during connection
setup.
Appliance is shown
disconnected on the mobile
app.
Other Wi-Fi problem.
20
Possible cause
Wi-Fi turned off.
Home network issues.
The home network is not on
2.4 GHz, the network is
hidden, or the signal strength
is too weak.
Wi-Fi is disabled or home
network issues.
Different causes.
Solution
Switch on Wi-Fi (see 'Switching on
Wi-Fi').
Check that your home network signal
is strong and internet connection is
working.
Please check the network settings.
Ensure a 2.4 GHz and visible network.
If the signal is too weak, try to move the
network router closer to the appliance.
Ensure that Wi-Fi is enabled and the
internet connection in your home
network is working. Repeat the
connection setup if necessary.
First disable the Wi-Fi and enable it
again. Check that the internet
connection in your home network is
working. Repeat the connection setup
if necessary.
Further troubleshooting available on
www.connectlife.io or contact the
service department.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bu90aa-abb01

Table of Contents