Summary of Contents for Explo Tx-20K
- Page 1 Explo Zündtechnik Tx-20K Manual Explo Zündtechnik Harald Kulterer Völkermarkterstrasse 240 A-9020 Klagenfurt Tel: +43 (0) 463 / 32 2 45 Fax: +43 (0) 463 / 32 2 45 75 Mobil: +43 (0) 664 / 51 007 51 Allgemein www.explo.at office@explo.at...
- Page 2 Bedienungsanleitung TX-20K „Armed“-LED Ignite Channel 1 „Battery“-LED (Test) Armed 1 Ignite Channel 2 Armed 2 Ignite Channel 3 Armed 3 Ignite Channel 4 Ignite Channel 5 (Test) Armed 4 Technical data Measure: 158 x 83 x 31 mm Weight: 330 g...
- Page 3 Battery Control After switching on the device the power supply is measured and the status of the battery is shown with the yellow LED. Constant light: Battery is FULL Flashing: Battery is EMPTY The yellow LED is also flashing while the device is operating, if the battery needs to be changed.
- Page 4 Igniting channels over 20 To ignite the channels 21-70, simply press Button 5 after igniting the channels 16-20. Once this is done, every further push of button 5 ignites a single channel from 21 up to 70.
Need help?
Do you have a question about the Tx-20K and is the answer not in the manual?
Questions and answers