Advertisement
1: Level Control (channel 1–3):Adjust the input level of the sig-nal(s) with this control. Each channel's level control governs theright/mono and left input jacks simultaneously.2: Pan Control, (channel 1–3):This control proportions the signalbetween the left and right outputs. In stereo applications it actsas a left/right balance control.3: Rev/Eff Send Control (all channels):Adjust the amount of signalsent to the internal7reverb and external7effect (if used) with thiscontrol. 4: Line Out Select Switch (channels 3 and 4):When this switch ispressed in, the signal is7removed from the line out buss. (Forexample, if you want a click track or other signal in your amp butnot in the house mix, press in the switch for that signal's chan-nel. The signal will still be in your amp, but not in the mix at theline out jack. You hear it, the house doesn't!)5: Instrument Level Control (channel 4):An instrument level signalcan be plugged directly into channel 4's instrument jack (#16).Adjust the level of the instrument with this control.6: Mic Level (channel 4):A low impedance microphone signal canbe plugged into channel 4's microphone input jack (#17). Adjustthe input level of the microphone signal with this control. Theadjacent peak LED (#7) will light when the signal is7too hot.7: Mic Level Peak LED (channel 4):This LED will light when themicrophone input signal is7near clipping
KX-220
Stereo Keyboard Amplifier
The Top Panel:
4
3 1 4 1 3
11
14
12
10
Advertisement
