CO/Tech OTL-24-WH Quick Start Manual

LED Downlights
A . 36-5346
rt no
Please read the entire instruction manual before using the product and save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
If you have any questions regarding technical problems please contact our Customer Services.

Safety

Note: The light fitting may be mounted in the ceiling
by the home owner. However, connections to
the driver and 230 V power supply must only be
carried out by a qualified electrician or registered
competent person.
• If you are at all unsure about any phase of
the installation, consult a qualified electrician to
perform the job.
• The power switch must be connected to
the primary side (230 V side) of the converter.
• Any possible repairs should also only be
carried out by a qualified electrician.

Installation

Note: Make sure that the fixture is disconnected
from the mains (230 V) before starting work.

Flush mounting

Drill a 63 mm hole
in the ceiling to
a mounting depth of
30 mm.

Specifications

Protection class
LED power
Colour temperature
Lamp fixture brightness 240 lm
Colour rendition (Ra)
Mounting hole size
Designed for connection to a 350 mA driver
(an LED multidriver should be used if a dimmer
function is required).
UNITED KINGDOM • internet www.clasohlson.co.uk
M otl-24-WH
odel
IP23
3.2 W
3000 K (warm white)
83
63 mm

Surface mounting

1. Use the metal lamp housings when surface
mounting. Thread the leads through the back
of the housing.
2. Make sure that the mains lead lies in the groove
at the bottom of the housing before fixing it to
the ceiling with the supplied screws.
3. Push the fixture into the housing until it sits
securely.

Responsible disposal

This symbol indicates that this
product should not be disposed
of with general household waste.
This applies throughout the entire
EU. In order to prevent any harm to
the environment or health hazards
caused by incorrect waste disposal,
the product must be handed in for
recycling so that the material can be
disposed of in a responsible manner.
When recycling your product, take it to
your local collection facility or contact
the place of purchase. They will ensure
that the product is disposed of in
an environmentally sound manner.