Radio Waves - Alcatel 1068 Manual

INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.
CHARGERS:
Mains powered chargers will operate within the temperature range
of: 0°C (32°F) to 40°C (104°F ).
The chargers designed for your phone meet the standard for safety
of information technology equipment and office equipment use.
They are also compliant with the ecodesign directive 2009/125/EC.
Due to different applicable electrical specifications, a charger you
purchased in one jurisdiction may not work in another jurisdiction.
They should be used for this purpose only.
Model: PA-5V550mA-006 PA-5V550mA-015 PA-5V550mA-005
PA-5V550mA-026
Input Voltage: 100~240V
Input AC Frequency: 50/60Hz
Output Voltage: 5.0V
Output Current: 0.55A
Output Power: 2.75 W
Average active efficiency: 69.0%
No-load power consumption: 0.08 W
Model: UC11
Input Voltage: 100~240V
Input AC Frequency: 50/60Hz
Output Voltage: 5.0V
Output Current: 1.0A
Output Power: 5.0 W
Average active efficiency: 73.8%
No-load power consumption: 0.08 W
11

Radio waves ................................................

Proof of compliance with international standards (ICNIRP) or with
European Directive 2014/53/EU (RED) is required of all phone
models before they can be put on the market. The protection of the
health and safety for the user and any other person is an essential
requirement of these standards or this directive.
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR
EXPOSURE TO RADIO WAVES.
Your phone is a radio transmitter and receiver. It is designed not
to exceed the limits for exposure to radio waves (radio frequency
electromagnetic fields) recommended by international guidelines.
The guidelines were developed by an independent scientific
organisation (ICNIRP) and include a substantial safety margin
designed to assure the safety of all persons, regardless of age and
health.
The radio wave exposure guidelines use a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit for
mobile devices is 2 W/kg for Head SAR and Body-worn SAR, and 4
W/kg for Limb SAR.
Tests for SAR are conducted using standard operating positions
with the device transmitting at its highest certified power level in all
tested frequency bands. The highest SAR values under the ICNIRP
guidelines for this device model are:
1068X/1068D:
Maximum SAR for this model and conditions under which it was
Head SAR
Body-worn SAR (5 mm)
Limb SAR (0 mm)
recorded
GSM 900MHz 0.92 W/kg
GSM 1800MHz 1.04 W/kg
GSM 1800MHz 1.82 W/kg
12