SAFETY INSTRUCTIONS "Electric discharge" This symbol, alert you to the presence of uninsulated dangerous voltage inside the product risk of electric shock. "Exclamatory point" This symbol, alert the user to the presence of important operating and maintenance instructions included to the product. 1.
1. QUICK START - PASSIVE SPEAKER CABINET Make all initial connections with all the equipment powered off, and ensure that all the main volume controls are turned completely down. -. For Passive Full-range Speakers 1). Connect one side of the speaker cable to the output CHA/CHB or Binding Post of your stereo power amplifier and the other side to the input socket of your speaker cabinet.
2. QUICK START - ACTIVE SPEAKER CABINET Make all initial connections with all the equipment powered off, and ensure that all the main volume controls are turned completely down. -. For Active Speaker Cabinets 1). Connect one side of the signal cable at your audio mixer into output left /right (with Stereo-Jack or XLR) and the other side of the cable into the line input (COMBO) of your active speaker cabinet (with Stereo-Jack or XLR).
3. CONNECTION PLATE -. ACTIVE SPEAKER CABINET PS 4HA (1) BI-POLAR MAIN POWER SWITCH (2) AC POWER SOCKET WITH MAIN FUSE (3) GROUND SWIT H (4) SIGNAL LIMIT, GREEN/RED LED (5) LINK OUT ON XLR CONNECTOR (6) LINE /MIC INPUT ON (7) MAIN VOLUME CONTROL...
-. ACTIVE SPEAKER CABINET PS 4LA (1) BI-POLAR MAIN POWER SWITCH (2) AC POWER SOCKET WITH MAIN FUSE (3) GROUND SWITCH (4) CLIP INDICATOR RED LED (5) LINK OUT ON XLR CONNECTOR (6) STEREO JACK INPUT (7) MAIN VOLUME CONTROL - PASSIVE FULL-RANGE SPEAKER PS 4L (1) INPUT: Receive the power coming from an external power amplifier (SPK +1/-1 connected;...
-. ACTIVE SPEAKER CABINET PS 3A (1) BI-POLAR MAIN POWER SWITCH (2) AC POWER SOCKET WITH MAIN FUSE (3) GROUND SWITCH (4) CLIP INDICATOR RED LED (5) LINK OUT ON XLR CONNECTOR (6) STEREO JACK INPUT (7) MAIN VOLUME CONTROL - PASSIVE FULL-RANGE SPEAKER PS 3 (1) INPUT: Receive the power coming from an external power amplifier (SPK +1/-1 connected;...
TIP SLEEVE TIP RING SLEEVE 5. SUSPENSION POINTThe PS series speaker cabinet also provides the suspension points for fixed installation. How to use them? First, open the dust covers, and the next, mount the flying ringsto the suspension points (M10 1.5PH LENGTH: 30mm).
Descriptions PS4HA Active Active System type Bi-Amp. with DSP processor 300Watt RMS Class H LOW - RMS Output Power HIGH - RMS Output Power 100Watt RMS Class AB Max SPL at 1m 121.5dB SPL calculated Frequency Response 50Hz / 20kHz +/-10dB Impedance Low - High Low 4 Ohm - High 8 Ohm Crossover Frequency...
Page 11
SEIKAKU TECHNICAL GROUP LIMITED No. 1, Lane 17, Sec. 2, Han Shi W. Road, Taichung, 401 Taiwan http://www.altomobile.com Tel: 886-4-22313737 email: info@altomobile.com Fax: 886-4-22346757 All rights reserved to ALTO Mobile. Due to continued development in response to customer feedback, product features, specifications and/or internal/external design may be changed without prior notice.
Need help?
Do you have a question about the PS Series and is the answer not in the manual?
Questions and answers