Page 1
AMSF900 is a smoke detector for private use (houses and apartments). It’s equipped with a 900 series radio transmitter; the programming is identical to the other 900 series devices. The alarm signal is given when inside the chamber of the sensor it’s accumulated a certain quantity of smoke;...
Page 2
programming and reporting Supervision: when the sensor works fine the LED will flash every 40 seconds. When the detection chamber is dirty, the supervision is interrupted, the LED will continue to emit a flash every 40 seconds, but the fault will be reported as failure to supervision. Low Battery: if the battery drops below around 6.5 V the transmitter sends a low battery signal.
Need help?
Do you have a question about the 900 Series and is the answer not in the manual?
Questions and answers