Page 2
CARE & MAINTENANCE △ Clean the dust with a soft cloth △ Do not store in extremely wet environment. HARDWARE Lock washer Flat washer Allen Key Φ8 Φ8 13PCS 13PCS Shorter Longer Screw Screws M8x55MM M8x60MM 9PCS 4PCS PARTS Back Seat Front Legs with Hind Legs...
Page 3
PRODUCT AS SEMBLY Put chair back on a clean flat surface. Align seat in the back pad as shown in the diagram. Using SHORTER SCREW (4) with Washer (#2, 1). DO NOT FULLY TIGHTEN. First HAND tighten then tightened using key up-to 60-80% only at this stage.
Page 4
PRODUCT ASSEMBLY Align front legs in the seat pad as shown in the diagram. Using LONGER SCREW (5) with Washer (#2, 1 ). DO NOT FULLY TIGHTEN. First HAND tighten then tightened using key up-to 60-80% only at this stage. Put chair in the upright position and SIT ON THE CHAIR to press downwards on the seat pad.
Page 5
PRODUCT ASSEMBLY Close the black fabric cover Page 4 of 4...
Need help?
Do you have a question about the ID305 and is the answer not in the manual?
Questions and answers