Disassembling/Reassembling Procedures - Toshiba F Series Service Manual

7. Disassembling/Reassembling Procedures

Be sure to disconnect the AC adapter and turn OFF the BATTERY button before disassembling the gigabeat.
As long as power is supplied to the gigabeat by the AC adapter or BATTERY, the LCD and almost all the ICs are
powered even during power OFF. Therefore, the AC adapter and BATTERY must be disconnected before repairing the
gigabeat.
When the BATTERY button is set to "OFF", power supply from the BATTERY is shut off and all the settings become
default. This is the same state as where the BATTERY is disconnected.
37