Advertisement
Quick Links
Advertisement
Related Manuals for D&B Q-SUB
Summary of Contents for D&B Q-SUB
- Page 1 Q-SUB Manual (2.1E)
- Page 2 Please refer to the information in the operating manual. WARNING! Dangerous voltage! General Information Q-SUB Manual Version 2.1E, 11/2004, D2042.E.02 © by d&b audiotechnik AG 2004; all rights reserved. The information contained in this manual has been carefully checked for accuracy, at the time of going to press, however no guarantee is given with respect to the correctness.
-
Page 3: Safety Precautions
Generally speaking, a distance of 0.5 m (1.5 ft) from magnetic data carriers (floppy disks, audio and video tapes, bank cards, etc.) is sufficient; a distance of more than 1 m (3 ft) may be necessary with computer and video monitors. Q-SUB Manual (2.1E) Safety precautions - 1... - Page 4 Z5013 Loudspeaker stand for the deployment of full range cabinets. The Q-SUB has a total of 10 sockets in the front grill and side panels to accept the Z5153 Locking pins 8 mm that connect to the array links of the Q1 system.
-
Page 5: Operation With E-Pac
Q-SUB systems. Driven in CSA mode a reversed cabinet will eliminate the energy radiated to the rear of two front radiating Q-SUB cabinets (CSA not Fig. 3: CSA Stack (Example) selected). Please note that all other settings of the amplifiers driving a CSA have to be identical (input signal, level, 100 Hz, EQ, delay). - Page 6 Q-SUB cabinets MUST be positioned at the top of the column. Q1 and Q-SUB cabinets use the same sockets in the front grill and side panels to accept the Z5153 Locking pin 8 mm. Located on the top of the side panels of the Q-SUB cabinet is an additional socket that enables the Q1 cabinet to be tilted downwards up to 6°...
-
Page 7: Eu Declaration Of Conformity (Ce Symbol)
EU conformity of loudspeakers This declaration applies to loudspeakers manufactured by d&b audiotechnik AG and includes the types listed in the table below: - Q-SUB Z0510 All production versions of these types are included, provided they correspond to the original technical version and have not been subject to any later design or electromechanical modifications. - Page 8 d&b audiotechnik AG, Eugen-Adolff-Str. 134, D-71522 Backnang, Germany, Phone +49-7191-9669-0, Fax +49-7191-95 00 00_______...