Generally speaking, a distance of 0.5 m (1.5 ft) from magnetic data carriers (floppy disks, audio and video tapes, bank cards, etc.) is sufficient; a distance of more than 1 m (3 ft) may be necessary with computer and video monitors. Q-SUB Manual (2.1E) Safety precautions - 1...
Page 4
Z5013 Loudspeaker stand for the deployment of full range cabinets. The Q-SUB has a total of 10 sockets in the front grill and side panels to accept the Z5153 Locking pins 8 mm that connect to the array links of the Q1 system.
Q-SUB systems. Driven in CSA mode a reversed cabinet will eliminate the energy radiated to the rear of two front radiating Q-SUB cabinets (CSA not Fig. 3: CSA Stack (Example) selected). Please note that all other settings of the amplifiers driving a CSA have to be identical (input signal, level, 100 Hz, EQ, delay).
Page 6
Q-SUB cabinets MUST be positioned at the top of the column. Q1 and Q-SUB cabinets use the same sockets in the front grill and side panels to accept the Z5153 Locking pin 8 mm. Located on the top of the side panels of the Q-SUB cabinet is an additional socket that enables the Q1 cabinet to be tilted downwards up to 6°...
EU conformity of loudspeakers This declaration applies to loudspeakers manufactured by d&b audiotechnik AG and includes the types listed in the table below: - Q-SUB Z0510 All production versions of these types are included, provided they correspond to the original technical version and have not been subject to any later design or electromechanical modifications.