LX Polaris Quick Start Manual

For help visit help.incyt.io
LX group, the LX logo, Incyt, and the Incyt logo, are trademarks or
registered trademarks of LX Group Pty Ltd.
Copyright 2020 LX Group Pty Ltd. All rights reserved.
Apple and the Apple Logo are trademarks of Apple Inc., registered in
the U.S. and other countries. App Store is a service mark of Apple Inc.,
registered in the U.S. and other countries.
Google Play and the Google Play logo are trademarks of Google Inc.
Temperature
The recommended temperature range of
this device is 5ºC to 50ºC. Use outside of this
range may limit the device performance and
functionality, and may reduce the battery and
operational life of the device. We recommend you
carefully consider these factors when installing.
Wireless network
This device uses multiple technologies for geo-
location and communication with the Incyt
platform. Installing the device in a location with
unobstructed visibility to the sky/GPS satellites,
and strong cellular connectivity, will ensure
maximum performance and accuracy of the
device.
2 2. Clean the mounting surface prior to installation
by removing debris, and wiping using the alcohol
wipe included. Roughen smooth surfaces using a
scouring pad or steel wool before application.
3 3. Remove the VHB protective film, and press the
device firmly against the mounting surface for
30 seconds to maximise adhesion.
Note: VHB adhesive will reach maximum bonding
strength after 24 hours.
Security Bracket
For installation scenarios where the device may
encounter vibration, or be exposed to tampering,
mount using the security bracket accessory
(purchased separately from incyt.io) as per the
following diagram:
Safety and compliance
Ensure installation complies with all relevant local
regulations and requirements.
Troubleshooting
Further installation, activation and troubleshooting
information is available at incyt.io
Polaris
Quick Start Guide