Cleaning The Condensation Channel And Drainage Hole; Removing The Fittings; Removing Appliance Components - Siemens KI N Series User Manual

en Cleaning and servicing
Clean the appliance, the fittings,
2.
the accessories and the door seals
with a dish cloth, lukewarm water
and a little pH-neutral washing-up
liquid.
Dry thoroughly with a soft, dry
3.
cloth.
Insert the fittings and install the ap-
4.
pliance components.
Electrically connect the appliance.
5.
Switch on the appliance.
6.
→ Page 41
Putting the food into the appliance.
7.
13.3 Cleaning the condensa-
tion channel and drain-
age hole
Regularly clean the condensation
channel and drainage hole to ensure
that the condensation can drain.
Carefully clean the condensation
▶
channel and the drainage hole,
e.g. using a moistened cotton bud.
→ Fig.
7
13.4 Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
Pull out and remove the shelf.
▶
→ Fig.
8
Removing the extendable shelf
Firmly pull out the extendable shelf
1.
until the locking catch is released.
→ Fig.
9
Lower the shelf and swing it out to
2.
the side.
Removing door rack
Lift the door rack and remove it.
▶
→ Fig.
10
48
Removing the fruit and vegetable
container
Pull out the fruit and vegetable
1.
container as far as it will go.
Lift the fruit and vegetable con-
2.
tainer at the front
⁠ .
→ Fig.
11
Removing the frozen food
container
Take out the frozen food container
1.
as far as it will go.
Lift the frozen food container at the
2.
front and remove it
→ Fig.
12
13.5 Removing appliance
components
If you want to clean your appliance
thoroughly, you can remove certain
components from your appliance.
Removing the shelf above the fruit
and vegetable container
Pull out the fruit and vegetable
1.
container.
Remove the shelf
2.
⁠ .
→ Fig.
13
Press the fastenings for the lower
3.
cover outwards.
→ Fig.
14
Lift the cover at the front
4.
pull it out at the rear
→ Fig.
15
and remove it
⁠ .
and rotate it
and
⁠ .