PHI VILLA 26'' Steel Wood Burning Fire Pit Assembly Instructions

Advertisement

ASSEMBLY INSTRUCTIONS

Before starting assembly:

 Read all instructions throughly.
Open and check boxes for parts list.
If any parts are broken or missing call or email customer service.
Keep all packaging until you are satisfied with your product.
Returns are not accepted without original packaging.
Make sure you have ample space for assembly.
WARNING:
DO NOT FULLY TIGHTEN ALL SCREWS UNTIL ASSEMBLY
IS COMPLETE.
DO NOT strain yourself. Some items are easier to assemble with
the help of another person.
DO NOT force bolts or nuts. If a nut becomes stick, unscrew it
and start again.
DO NOT assemble on an uneven surface to prevent any damage
and to ensure proper assembly.
USER'S MANUAL
Customer Service:
1-877-606-2818
Open Monday through Sunday
9am-6pm PST
service@alphamarts.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 26'' Steel Wood Burning Fire Pit and is the answer not in the manual?

Questions and answers

Summary of Contents for PHI VILLA 26'' Steel Wood Burning Fire Pit

  • Page 1 ASSEMBLY INSTRUCTIONS USER’S MANUAL Before starting assembly:  Read all instructions throughly. Open and check boxes for parts list.  If any parts are broken or missing call or email customer service.  Keep all packaging until you are satisfied with your product. ...
  • Page 2 Assembly Instruction Product Name: 26’’ Steel Wood Burning Fire Pit WARNINGS: • This fire bowl is intended for outdoor use only. Do not use on wooden decks. • This fire bowl is intended to burn wood logs only. Do not burn coal, leaves, or other combustible materials in the fire bowl.
  • Page 3 Pre-Assembly: TOOLS REQUIRED ( Not Included ) FIRE PIT PARTS LIST PARTS Handle Mesh wire cover Fire Bowl Legs Poker HARDWARE LIST Hardware M6 x10 mm Bolt M6 Nut...
  • Page 4 Step By Step Assembly Instructions: Step1: Insert handle (A) into hole in Mesh wire cover (B) and tighten it with M6 Nut (BB) underside to secure Step 2: Attach the legs (D) to the fire bowl (C) by using M6 x 10 mm bolts (AA), then tighten the bolts.
  • Page 5 Step 3: Put the mesh wire cover (B) on the fire bowl (C) and place the poker (E) near the fire pit for use anytime.

Table of Contents