Related Manuals for Homall T-OCRC8782
Summary of Contents for Homall T-OCRC8782
- Page 1 ASSEMBLY INSTRUCTIONS Scan the QR code for the assembly video. Contact us via email: hofficeservice@gmail.com for more information.
- Page 2 WARNING ! Please read the instructions line by line carefully before assembly, and assemble the item step by step according to the instructions. Don’t use the item before all the components are put together. For any damage or defective parts, please contact our online after-sale service for help.
- Page 3 Parts Check and make sure you get the components on the list, contact us for any missing Backrest Seat Angle adjuster Connector Plastic cover Plastic cover Base1 Base2 left hand side right hand side Control unit ×1 Allen Key Gas lift M8*25 M5*8 Plastic cover...
-
Page 4: Assembly Steps
Assembly steps 2. Attach wheels 1.Insert the foot into the groove then lift it up Click! ①Clip C1 into the slot of C2； ②Press down the center of C2 to complete the installation 3. Insert the gas lift and plastic cover 4. - Page 5 Assembly steps ×4 5. Fix the control unit to Please notice the handle is on the right side the base of the seat 6.Insert the gas lift into the control unit 7.Fix the angle adjuster(B2) onto the side of the seat ×2 8.Left Side ×2...
- Page 6 Assembly steps 3× 9. Fix the plastic cover(B5) 10. Left Side onto the side of backrest 11.Attach the backrest to the seat ×4 Install the lower screw, but do not tighten it Adjust back to align screw hole, install 12. Use the Allen key to make the upper screw, but do not tighten it the screws align in the holes Repeat on the other side, tighten...
- Page 7 Function 1 Loading capacity limited to 330lbs Please sit in the center of the chair when adjusting the height. 2 Seat Height adjustment Adjusting knob on the right For rocking 3 Rocking: Pull out the handle to start rocking. Insert to stop rocking 4 360 degree swivel...
- Page 8 Rocking function Pull out/push in the handle to unlock/lock the tilt when seated upright. Turn the knob clock- wise/counter-clock- wise to reduce/in- crease the tile ten- sion.
- Page 9 Assembly steps How to attach the headrest How to attach the headrest cushion method 1 cushion method 2 Put the elastic tapes through Put the headrest cushion the plastic holes and buckle. on the backrest and buckle. How to attach the lumbar cushion? Put the elastic through the Buckle the clips.
- Page 10 Q & A It is advised to check and tighten the screws on a regular basis, at least every 6 months. Contact us for missing parts, broken parts and defective parts, and we are glad to be helpful. Q: How to attach the seat to the back? A: Screw the seat and the back and do not tighten the screws.
Need help?
Do you have a question about the T-OCRC8782 and is the answer not in the manual?
Questions and answers