1. Introduction With the Wireless Presentation System, you can wirelessly transmit HDMI video and audio signals in Full HD over a distance of up to 50 m with an unobstructed view. Operation and installation are super simple. Real Plug & Play - Just plug in and get started. With additional transmitters (DS-55320), the set can be extended to up to 16 transmitter units (total).
2. Main Features • Wireless HDMI signal transmission up to 50 m (with unobstructed view) • Supports up to 16x transmitters (sources) + 1x receiver (output device) • Extend this set with up to 16 transmitter units (DS-55320) • Switch to the desired transmitter quickly and easily at the press of a button in order to reproduce your content •...
4. Product Features Features Description Plug and play Simply connect the transmitter with the PC HDMI ports and connect the receiver with the screen, the transmitter and receiver will connect automatically App Free The Wireless Presentation System Set doesn’t need any software or app installation, no setup, no IT team All in one...
pictures, rich in details and texture compared with 720p. High Security Protection No worries about the data security, the Wireless Presentation System Set supports AES 128-bit security encryption and WPA2/WPA-PSK/WPA2-PSK authentication protocol to protect data. HDCP is supported to protect the content 5.
Page 7
Transmitter Interface HDMI in jack x 1, Micro USB x 1, button Red and Blue Switch Button Power Supply DC5V/0.5A Power Consumption About 2,5 W Dimension 83 x 32 x 13mm Weight 27.1 g Receiver Interface HDMI out jack x 1, Micro USB x 1, button x 1 Red and Blue Power Supply...
6. Overview 6.1 Transmitter Unit 1. HDMI in Connect source devices, like with a computer or other devices with HDMI, the HDMI in also supports 5V power if the source devices has HDMI with a 5V output 2. Button Short press: start to cast Long press: long press up to 10 seconds for factory reset 2.
Static blue Connected and started to present Purple No HDMI in 6.2 Receiver Unit 1. HDMI out Connect with monitor or projector 2. Button: Press 10 seconds for factory reset 2. LED To display different status 3. Micro USB For power supply LED indicator of the Description Receiver Unit...
Page 10
• Connect the Micro USB port of the Receiver to the USB port of the TV through the Wifi USB connection / power supply cable. 2. Connect to Internet • Connect the Receiver SSID with your smart devices, the SSID and password are shown on the left upper corner of the screen...
Page 12
• Open the browser with your phone, and input the IP address which show on the left upper corner of the screen to enter to the Receivers management platform Remark: when connect to router, the IP address will be updated accordingly...
Page 13
• Select the network and connect in the management platform, the Receiver Unit will link to the network and show the network SSID on the middle of the screen (to get a better performance, we recommend connecting with 5G router) The platform will list all your wireless router SSID, select the SSID from the wireless router and enter the password.
Page 14
3. Language • User can change language in the management page 4. Screen Position • If the Receiver HDMI out size is not compatible with the display, user can use Screen Position to adjust the zoom in and zoom out of the screen...
Page 15
5. Streaming mode • You can select to use streaming or mirror mode...
7.2 Transmitter Installation 1. Connect the Transmitters HDMI Unit to PC HDMI port Remark: If the source device HDMI has a 5V power output, then there is no need to connect a USB cable for power. If not, please connect the Transmitter with PC by USB cable for power. 2.
9. Streaming 9.1 Streaming from Transmitter 1. Connect the Transmitter HDMI Unit to a PC HDMI port Remark: if the source devices HDMI with 5V power output, then there is no need to connect a USB cable for power, if not, please connect the Transmitter Unit with PC by USB cable for power.
Page 18
IOS Devices: • Search RX (Receiver) SSID and connect in Wifi settings. (SSID: DIGITUS…, Password: 12345678), the is SSID shown on the left upper corner of the RX start screen • Use the screen mirroring function of the smartphone •...
Page 19
Remark: there are different names on different brands of phones or tablets: WIFI Display, WLAN Display, Wireless Display, Allshare Display, Allshare Cast, Wireless Display, MirriorShare, etc. Frequency Range & Maximum Transmit Power WiFi Standard: 802.11b/g/n/ac 5G WiFi Channel: 36, 40 Core Frequency: 5180, 5200 Range: 5170 ~5 210MHz Bandwidth: 20/40MHz...
Page 20
Important safety instructions Please read the following safety instructions carefully before installation and operation: Observe all warnings and instructions concerning this device Do not expose the device to rain, moisture, vapors or liquids Do not insert any objects into the device Do not attempt to repair the unit yourself or open the cabinet.
Page 21
Disclaimer The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Hereby ASSMANN Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.
Need help?
Do you have a question about the DS-55319 and is the answer not in the manual?
Questions and answers