Table of Contents
Advertisement
Quick Links
unitechnic.cz s.r.o.
Customer Service Department
Former sugar refinery facility
Hlavní 29 (Hall No. 3 uni-max)
277 45 Úžice
Tel. of Customer Service Dept.
266 190 156
266 190 111
Fax
266 190 100
http://www.uni-max.cz
E-Mail:
reklamace1@khnet.cz
obchod@khnet.cz
24
CONTACTS
T-Mobile
O
2
Vodafone
TRANSLATION OF THE
603 414 975
601 218 255
608 227 255
ORIGINAL MANUAL
DRILL PRESS
S-2 5A
DPS25A
Advertisement
Table of Contents
Summary of Contents for Uni-max S-2 5A
- Page 1 CONTACTS unitechnic.cz s.r.o. Customer Service Department Former sugar refinery facility Hlavní 29 (Hall No. 3 uni-max) 277 45 Úžice TRANSLATION OF THE Tel. of Customer Service Dept. 266 190 156 T-Mobile 603 414 975 ORIGINAL MANUAL 266 190 111 601 218 255...
-
Page 2: Technical Data
Dear Customer, thank you for purchasing a product from UNI-MAX. Column Our company is ready to provide you with its services – before, during and after you purchase a product. Pos. Cat. no. Description Pos. Cat. no. Description Should you have any questions, suggestions or recommendations, please contact our place of business. -
Page 3: Parts List
PARTS LIST SAFETY PRECAUTIONS Drill head ● The equipment may only be operated by persons over 18 years of age, duly qualifi ed, informed about and trained in the principles of safety and occupational health and safety. Pos. Cat. no. Description Pos. - Page 4 ● Prevent access to animals, children and unauthorised persons. Total dimensions of the drill ● Do not place feet or hands into the working area. ● Never leave the equipment unattended whilst it is in operation. ● Do not use the equipment for any purpose other than that for which it is intended. ●...
-
Page 5: Installation
Electrical box ● Do not operate the equipment in an explosive environment (during varnishing, when working with fl am- mable liquids, etc.). ● Do not use it in a wet environment or when the equipment is wet. The electrics are constructed for use in normal environments at ambient temperatures of +5°C to +40°C, at a relative humidity not exceeding 50% at a temperature of +40°C. -
Page 6: Basic Instructions
Power grid connection: Spindle sleeve The connection is made directly to a thermal overload circuit breaker or in the case of multiple spindle machines to an electrical junction box that is common for all drilling heads. Pay attention to the earthing bolt! (See attached electrical connection diagram.) Basic instructions: PRIOR TO PERFORMING ANY DISASSEMBLY, IT SHOULD BE STANDARD PRACTICE TO DISCON-... - Page 7 Sliding mechanism shaft Motor: In the event that you need to disassemble the stator, proceed as follows: • DISCONNECT THE POWER CORD FROM THE MAINS POWER SUPPLY! • According to the instructions provided above, remove the gearbox, the spindle bush and the shaft of the sliding mechanism.
-
Page 8: Operation
Worm gearbox assembly OPERATION User instructions These are your instructions for operation and a list of spare parts for your drill. These materials have been prepared for persons using this drill and for persons responsible for its maintenance and servicing, and thus must be easily accessible for all specifi... - Page 9 Column EL. WIRING DIAGRAM...
-
Page 10: Maintenance
Third shaft MAINTENANCE • Always keep tools clean. Foreign material entering the tool mechanism may cause damage to the tool. • Do not use any aggressive cleaning agents and solvents for cleaning. • We recommend wiping plastic parts with a rag dipped in soapy water. •... - Page 11 Second shaft PARTS DESCRIPTION DRAWING Drill head...
- Page 12 Rotor shaft, Motor Gearbox...