Elinta CityCharge User Manual

CityCharge
User manual
LED screen
To start charging:
1) Connect charging cable to electric vehicle;
2) Connect charging cable to charging station;
3) Put the RFID identification card to the right place. The charging will start after few seconds.
LED strips indicates status of charging station:
•
Blue – ready / charging finished;
•
Red – station is busy / charging electric vehicle.
Charging cable is locked during the vehicle charging. When the vehicle is fully charged the charging
stops automatically, or it can be stopped by using RFID identification card.
Elinta Charge, UAB
Partizanu g. 63M,
Kaunas 50306
Lithuania
Tel.: +370 615 71604
info@elintacharge.com
www.elintacharge.com
"CHARGING" indication is lightning during
the vehicle charging.
"READY" indication lights on when the
charging is finished.
A/B indication is lightning in red during the
vehicle charging.
A/B indication is lightning in blue when the
charging is finished.
The place to use RFID card.