FMA FURY Owner's Manual

FMA LIMITED WARRANTY ON RADIO RECEIVER PRODUCTS
FMA, Inc. warrants this receiver to be free of manufacturing defects for the term of one year from
the date of purchase. Should any defects covered by this warranty occur, the receiver shall be
repaired or replaced with a unit of equal performance by FMA, Inc., or an authorized FMA service
station.
LIMITS AND EXCLUSIONS
This warranty may be enforced only by the original purchaser, who uses this receiver in its original
condition as purchased, in strict accordance with the Fury owner's manual. Receivers returned for
warranty service to an FMA service center will be accepted for service when shipped post-paid,
with a copy of the original sales slip or warranty registration form, to the service station advised by
FMA, Inc.
THIS WARRANTY DOES NOT APPLY TO
1. Consequential or incidental losses resulting from the use of this receiver.
2. Damage resulting from accident, crashes, misuse, abuse, neglect, electrical surges,
reversed polarity on connectors, lightning or other acts of God.
3. Damage from failure to follow instructions supplied with the product.
4. Damage occurring during shipment of the product either to the customer or from the
customer for service (claims must be presented to the carrier).
5. Damage resulting from repair, adjustment, or any alteration to product by any one
other than an authorized FMA technician.
6. Installation or removal charges, or damage caused by improper installation or
removal.
CALL (301) 668-7614 FOR INFORMATION ABOUT SERVICE AND WARRANTY REPAIRS.
4 CHANNEL FM DUAL
CONVERSION SUB-
MICRO SURFACE
OWNER'S MANUAL
NOTE: PLEASE READ MANUAL COMPLETELY BEFORE OPERATION
INTRODUCTION:
Thank you for purchasing the FMA Direct Fury FM surface receiver. Designed in
collaboration with Sergio Zigras of Z-Tron, this tiny new surface receiver packs a so-
phisticated microcontroller and advanced dual conversion circuitry into a package with
the footprint of two postage stamps side by side.
1.82"x0.94"x0.67" and a weight of a mere 0.6 oz (18 gm) encased, the new Fury will re-
define the term performance in the surface market. Built on the foundations of reliable
aircraft model receiver technology only found in FMA Direct receiver products, the new
Fury will provide glitch free operation in even the most severe racing and boating con-
ditions. Because it is microprocessor based, Fury includes new advanced S.M.A.R.T.
(Selective Microprocessor Advanced Radio Transmission) decoding that digitally filters
every frame of information to ensure that the servos never react to any random noise
that might get past the superior RF circuitry. In the unlikely event that RF noise does
get too high for reliable control, the Fury will failsafe to a "no servo output" state. This
is great if you have an electric car and somebody turns a transmitter on your fre-
quency. The ESC will automatically go to zero throttle. Available in two basic models
to accommodate FM shift, the Fury supports either positive or negative FM modula-
tion. Heavy-duty, SMT construction on a single, glass-epoxy P.C. board along with
various other circuit improvements make the Fury design one of the most reliable we
have ever produced. So plug it in and FEEL THE FURY!
SPECIFICATIONS:
SIZE: 1.82"L X 0.94"W X 0.67"H (IN NYLON CASE)
WEIGHT: 18 gm / 0.60 OZ.
DESIGN: DUAL CONVERSION, SUPER HETERODYNE
SPECIAL CIRCUITRY: uP CONTROLLED S.M.A.R.T. DECODING
CHANNELS: 1-4
MODULATION: FM / PPM (PULSE POSITION MODULATION)
FREQUENCY: R/C CH 61 - 90 - U.S. LEGAL SURFACE 75 MHz
ULTIMATE BANDPASS: ± 8.5 KHz @ >55 dB DOWN
USABLE SENSITIVITY: > -95 dBm
3OIP: +12 dBm
OPERATING VOLTAGE: +3.5V TO +26V DC LIMITED ONLY BY SERVO REQUIREMENTS
LEGAL USE: MEETS AMA GUIDELINES/FCC 1999 RADIATION REQ.
FMA, Inc.
5716A Industry Lane
Frederick, MD 21704
Sales: (800) 343-2934 -Technical: (301) 668-7614
RECEIVER
With dimensions of