Page 2
12-36 (EndSpan), or on the 45-78 (Midspan). 3. Compliant with IEEE802.3af standard. 4. Compact design, easy to plug and read. 5. The POEfinder is designed with both jack and plug, so no extra cable is needed. 6. Easy to read with indicators on both sides.
Page 3
Hobbes POEfinder Power over Ethernet Status Finder Instructions for Operation Step 1: Connect the plug side of the Hobbes PoEfinder to an active network outlet or connect to the Hobbes PoEfinder jack via network cable. Step 2: In a few seconds, the LEDs will indicate the PoE voltage (48V) if detected or not.
Need help?
Do you have a question about the POEfinder and is the answer not in the manual?
Questions and answers