Storage Space - privileg MID-10 Quick User Manual

2. During Battery Charging, the user can operate the Privileg MID.
Note:
Charging time will be longer when you operate and charge the device at the same
time.
2.2 How to use the Memory Card
Insert the memory card:
Insert the memory card in the Card slot. Use a fingertip to put the card into the slot
until a "click" sound is heard. The upper left corner of the screen will prompt: "SD
card is ready".
Browsing files in the memory card:
Run "File Browser". Select "SD card", then "Open" to browse the contents of the
Card.
Remove the memory card:
Close all applications or documents which have been opened from the card.
Press the card lightly. It will be ejected partly. Pull the card out. The upper left corner
of the screen will prompt "SD card has been removed".
Note:
1. Insert card to in the correct position. Otherwise the card will be damaged.
2. Once the card has been locked, it can not be formatted or written.
3. Don't insert and remove the card repeatedly in a short time. It may cause the
card damaged.
4. Suggest using major brands of memory card to avoid any incompatibility.
2.3 Remove and insert memory card and U disk
Please don't remove the memory card and U disk while you are using the
files in it - photos, videos or music - this may cause the memory card and U disk
to be damaged and the device may exit automatically for protection. For memory
card removal, please refer to"2.2 How to use Memory Card". In order to remove the
U disk, please close all applications or documents which have been opened from the
U disk.

2.4 Storage Space

The device has three storage spaces: internal device storage, U disk and memory
card. The internal storage device is not shown, it can only be used to store system
10