Advertisement
EEI-4675, 4676 CHAIR
STEP 1:
1. Insert Right Leg (3) to Left Leg (2) as shown.
2. Insert 3 pieces of Bolts (A) from the pre-drilled holes on Left Leg (2) and Right Leg (3) as shown.
3. Use Allen Wrench (E) to tighten Bolts (A) as shown. Do not fully tighten Bolts (A).
STEP 2:
1. Please put Chair Body (1) upside down on a carpeted or padded surface.
2. Put the assembled Left Leg (2) and Right Leg (3) on the Chair Body (1) as shown.
3. Insert 4 pieces of Bolts (B) with 4 pieces of Spring Washers (C) and 4 pieces of Flat Washers (D) from the
pre-drilled holes on the assembled Left Leg (2) and Right Leg (3) into the Chair Body (1) as shown.
4. Use Allen Wrench (E) to tighten Bolts (B) as shown. Do not fully tighten Bolts (B).
5. When all parts are fixed, please fully tighten all Bolts (A&B).
Customer Service 609-256-9000︱www.modway.com
Page 2 of 3
Advertisement
Need help?
Do you have a question about the EEI-4675 and is the answer not in the manual?
Questions and answers