Casio fx-570ES User Manual page 11

• Norm: Selecting one of the two available settings (Norm1, Norm2)
determines the range in which results will be displayed in non-
exponential format. Outside the specified range, results are
displayed using exponential format.
–2
Norm1: 10
–9
Norm2: 10
Example: 1 ÷ 200 = 5 × 10
Specifying the Fraction Display Format
To specify this fraction
display format:
Mixed
Improper
Specifying the Complex Number Display Format
To specify this complex
number format:
Rectangular Coordinates 1Nc3(CMPLX)1(
Polar Coordinates
Specifying the Statistical Display Format
Use the following procedure to turn display of the frequency (FREQ)
column of the STAT Mode STAT editor screen on or off.
To specify this:
Show FREQ Column
Hide FREQ Column
Specifying the Decimal Point Display Format
To specify this decimal
point display format:
.
Dot ( )
,
Comma ( )
• The setting you configure here is applied for calculation results
only. The decimal point for input values is always a dot (
>  ,   > 10
x x
>  ,   > 10
x x
0.005
1Nc1(ab/c)
1Nc2(d/c)
1Nc3(CMPLX)2(
1Nc4(STAT)1(ON)
1Nc4(STAT)2(OFF)
1Nc5(Disp)1(Dot)
1Nc5(Disp)2(Comma)
10
10
–3
(Norm1)
(Norm2)
Perform this key operation:
Perform this key operation:
Perform this key operation:
Perform this key operation:
E-9
a bi
+ )
r∠ θ
)
.
).