Advertisement
Quick Links
FD25SP SLIDING DOOR SYSTEM Installation Manual
Recessed Mount Roller, Two-Way Soft Close
Thank you for using our product. Before installation, please read this manual thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.
ABOUT THE PRODUCT
●
This is a parts set for a sliding door system for indoor use.
●
Closer operates in both directions to open and close the
door, and slowly and gently pull it in.
●
The door can be installed without the use of tools.
SPECIFICATIONS
Height of the door.
Door width
Min. Door thickness
Max. Door weight
Vertical adjustment
Depth adjustment
・
The closing speed of the door may change depending on the
ambient temperature, operation, or installation quality.
・
The recommended ambient temperature range is 5°C to 40°C.
※
1
When using a light weight door, you may feel the resistance
of the soft closer when opening the door.
FOR YOUR SAFETY AND CORRECT INSTALLATION
Meaning of symbols
Warning
Caution
Warning
: If not followed, death or serious injury may result.
This product should be installed by a qualified person in accordance with this manual. If it is not installed correctly, the door
may fall and cause injury.
Provide a frame that can withstand the weight and impact of opening and closing the door. Be sure to use the specified
screws and tighten them securely. If the mounting strength is insufficient, the door may fall and cause injury.
Do not use this product for any other purpose, or with doors that are outside the specifications of this manual.
Do not disassemble or modify any parts other than those described in this document.
Caution
As well as being slightly injured, Indicates the contents that may cause property damage.
:
Follow the specified dimensions, specifications, and alignment of the door and frame. Warping, tilting or twisting of the
frame or door may cause failure.
If cutting any parts, make sure to remove any burrs before installation. Also check the upper track for any left-over burrs or
scraps and remove these.
This product is a part for architectural fittings. After installation, please check the function and safety of the final product.
Please inform the end user how to use the product safely.
Make sure to check the screws for slack at regular intervals (one month from first usage, half a year, and then one time
every year is recommended).
When installing the "pocket door", make an "easy-maintenance" structure. For example, use a removable panel.
Install the product with 2 people (in the case of 1 person, there is a risk of damaging components).
2400 mm or less
464 ー 1000 mm
24 mm
25 kg ※
1
/ door
± 3 mm
± 2 mm
Required
Prohibited
Part No.FD25SPDHCP
Be sure to use the
door stop when the
door is not in contact
with the vertical frame.
1 1
Advertisement
Summary of Contents for Lamp FD25SP
- Page 1 FD25SP SLIDING DOOR SYSTEM Installation Manual Recessed Mount Roller, Two-Way Soft Close Part No.FD25SPDHCP Thank you for using our product. Before installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand for future reference.
-
Page 2: Component Parts
Trigger, jig Upper roller Stopper (two-way) (With rollers) (surface mount) (recessed mount) FD25SP-30-TRG Part number FD25SP-TRM FD25SP-TRH FD25SP-WRH-DSC FD25SP-WRH-N FD30-HBG FD30-HSB FD25SP-30-TRJ Trigger (black) Trigger (black) Parts Retrofit Trigger 1820 mm～3640 mm ： 300 mm Hole pitch... - Page 3 Verification Before Installing Soft Closer If the trigger position is wrong, pull back the trigger Trigger catcher catcher to the correct position using a 6 mm diameter (Red colored part) round bar. φ 6 Correct set position Correct set position Trigger catcher (Red colored part) VIDEO...
- Page 4 Mounting of Floor Guide Position the floor guide below the center of the upper track, so that it is covered by the door when it is opened and closed. Fasten the four countersunk holes with the provided screws ⑥Floor guide Door Screw 3.5 ×...
- Page 5 Adjusting the door position Adjust the door parallel to the upper track with 7 - 13 mm of clearance between the door and floor. Caution Do not turn the adjustment screw beyond Do not turn adjustment screw beyond adjustment range. adjustment range.
- Page 6 補足1 Appendix 1 How to remove door Use a 10 mm support under the door. Then pull out the upper roller main unit from the door while raising the lever. It will be easier if you slide the hanger bolt with a spanner wrench. Caution Be careful not to let the door fall.
-
Page 7: Periodical Inspection
補足3 Appendix 3 Trigger positions Reference line for leading edge Reference line for trailing edge Leading edge when the door is fully opened (Leading edge when the door is closed) (Trailing edge when the door is opened) Door width - 297 [299] [Door width - 299] Standard installation... - Page 8 SUGATSUNE KOGYO CO.,LTD SUGATSUNE SHANGHAI Co., LTD SUGATSUNE AMERICA, INC Tokyo, JAPAN Shanghai, CHINA California, USA Phone: +86 21 3632 1858 E-mail:lamp@sugatsune.com.cn Phone: +81 (0)3 3866 2260 E-mail:export@sugatsune.co.jp Phone: +1 310 329 6373 E-mail:sales@sugatsune.com SUGATSUNE KOGYO (UK) LTD...