Table of Contents
Advertisement
3.2 Turning your headphones on and pairing
1.
To turn your headphones on and pair for the first time, press and hold the
for up to 10 seconds, until the red and blue light flash quickly.
Thereafter, press and hold the button, for up to 5 seconds to turn the headphones
on.
2.
Use the bluetooth menu on your phone to find the bluetooth headphones.
'GHP04BT' should appear in the list of available devices.
3.
Select 'GHP04BT. Once your headphones and mobile phone is paired, the
headphones will beep twice and the blue LED will start flashing slowly. If your mobile
phone asks you to enter a passkey, enter '0000'.
4.
To turn your headphones off, press and hold the
the led indicator light goes out.
5.
If you are using the line in cable, music will automatically play through the
headphones. You do not need to turn the headphones on.
If the headphones are not paired within 3 minutes, they will automatically switch off.
6.
Low Battery:
If the battery power drops below 3.3v, the red light on the headphones will flash twice
every 10 seconds and the headphones will beep twice.
3.3 Making a call
1.
Use your mobile phone to dial the number. Calls are switched to Bluetooth mode
automatically (some phones may require you to switch manually).
2.
To redial the last number, press the
button for up to 5 seconds, until
button.
button
Advertisement
Table of Contents
