Advertisement
Available languages
Available languages
Quick Links
ASSEMBLY INSTRUCTIONS
MAGNUM
COMPONENTS
1 x Tabletop
4 x Leg
24 x M6x20
4 x Cross nut
8 x M8x75
4 x Mounting plate
Required tools: hex key,
flat head screwdriver, ratchet
www.balzar.se
Attach the mounting plate to the leg using the cross nut
1
and the M8 bolts. Note that the countersink holes in the
mounting plate and the hole for the cross nut in the leg are
facing the right way. Use a flathead screwdriver to rotate
the cross nut. Use a ratchet to screw 2 x M8 bolts, apply
maximum force. Prepare all legs.
Use a hex key to screw 6 x M6 bolts per leg.
3
Apply normal force.
MAGNUM
Put the tabletop upside down on a protective cover.
2
Now place the assembled leg in the designated cavity.
Attach all 4 legs and gently turn the table upside down.
4
MAGNUM R
Advertisement
Related Manuals for Balzar Beskow MAGNUM
Summary of Contents for Balzar Beskow MAGNUM
- Page 1 ASSEMBLY INSTRUCTIONS MAGNUM MAGNUM MAGNUM R COMPONENTS Attach the mounting plate to the leg using the cross nut Put the tabletop upside down on a protective cover. and the M8 bolts. Note that the countersink holes in the Now place the assembled leg in the designated cavity.
- Page 2 MONTERINGSANVISNINGAR MAGNUM MAGNUM MAGNUM R KOMPONENTER Fäst monteringsplattan i benet med hjälp av sargsprinten och Lägg bordsskivan upp och ner på ett skyddande underlag. M8-skruvarna. Notera att försänkning i monteringsplatta samt Placera det förberedda benet i det hänvisade urtaget. hålet för sargsprint i ben är åt rätt håll. Använd en spårskruv- mejsel för att rotera sargsprinten i rätt läge.