Installation And Wiring; What's In The Box; Before Starting - Pyle PLXREQ710P User Manual

INSTALL ATION AND WIRING
Read these instructions and the following precautions carefully.

What's in the Box:

•
7-Band Parametric Equalizer
•
2 Mounting brackets
•
8 Phillips-head Screws
•
Power Red Wire with 1A Fuse

Before Starting

Mounting Precautions
The PLXREQ710P can be mounted next to the source unit or under the dash
using the mounting brackets. The front panel controls should be easily accessible
from the driver's seat.
In addition:
•
This unit requires additional mobile audio components for proper operation.
•
Always use great care when attaching anything to a vehicle! Check clearances in
front of, behind, and on both sides of the planned installation before drilling
any holes or installing any screws.
Wiring Precautions
Disconnect the ground (-) terminal on the vehicle's battery.
8
www.PyleUSA.com